Low-Profile Trolley Jack, 2 t, 95–510 mm Lift
Fits under lowered cars at 95 mm and lifts to 510 mm — heavy item, sea freight only.
Versión en preparación: esta página se muestra en inglés por ahora.
Jacks, presses, cranes, compressors, storage and tools
Workshop equipment is the long list every garage orders once and keeps for a decade: jacks and axle stands, hydraulic presses, engine cranes, air compressors, tool storage, brake lathes and torque-controlled hand tools. Product pages carry the figures that matter — load ratings, working pressures, bench dimensions — so purchases can be compared like for like.
Buy against real duty, not catalogue hero numbers: press tonnage for the jobs you actually do, compressor output (free air delivery at working pressure, not displacement) against the tools running simultaneously, and storage built for the weight of your tool inventory. Most items ship palletised by sea freight; smaller tooling can move by air. Send a single quotation request covering the whole workshop and we quote as one consignment.
Fits under lowered cars at 95 mm and lifts to 510 mm — heavy item, sea freight only.
Save €38
Six 45 cm rails to get tools off the bench and onto the wall — 12 kg pull per rail, no drilling into the tool.
A garage's first socket set: two drive sizes, metric and imperial, in a blow-moulded case that survives a van.
Wheel bolts, suspension, cylinder heads — with factory calibration certificate and ±3% accuracy.
Complete handrail kit with brackets and fixings — for cellar stairs, loft conversions and workshop steps.
The Profix MGSD400-40 is a wet-process brake disc grinding machine with a 400 mm capacity, Ra 0.8 µm finish and no airborne grinding dust.
The Profix MGSD400-45 is the upgraded wet brake disc grinder in the MGSD line, with 2200 W + 750 W motors and a 12-minute cycle for heavier-duty vehicles.
The Profix MGSD450-45 is the 2025 large-size wet brake disc grinder, taking commercial vehicle discs up to 450 mm in diameter and 45 mm thick.
The Profix MGSD450-45D is a 2026 dual-side wet disc grinder with three spindles that machines both faces at once, cutting a disc in about 8 minutes.
Rigid cast-iron surface mill with variable head speed and ball-screw table feed for precision cylinder head refacing.
360° roll-over cylinder head leak tester with stainless-steel heated water tank for fast, reliable pressure checks.
Bench brake lathe machining drums to Ø500 mm and discs to Ø385 mm with 245 mm cutting depth.
Stepless 70–320 rpm spindle and heavy 2.0 kW motor handle discs to Ø610 mm and drums to Ø715 mm.
Space-saving brake lathe for drums 180–320 mm and discs up to Ø350 mm with 100 mm tool travel.
Versatile bench lathe for drums Ø180–450 mm and discs Ø102–400 mm with 266 mm cutting travel.
Large-capacity brake lathe with gantry hoist — drums to Ø650 mm and discs to Ø520 mm.
Broad 350–650 mm processing diameter with 1.1 kW drive for demanding brake machining.
Wide 152–700 mm capacity brake lathe with three speeds and 0.75 kW / 380 V motor.
35° tilt, 1000 kg capacity dual-axis leveling table for precision cylinder head surface milling.
Cylinder boring machine with 30–180 mm bore range, 450 mm depth and inverter-driven 140–610 rpm spindle.
Cylinder boring machine with six spindle speeds 175–600 rpm and 30–180 mm boring capacity.
Special-order boring machine for middle/large heavy engines — 42–180 mm bore and 650 mm depth.
Compact 39–70 mm cylinder boring machine with 480 rpm spindle and 160 mm boring depth.
Two-model cylinder boring line: Ø65–105 mm and Ø80–165 mm with 300–400 mm boring depth.
Portable 39–70 mm cylinder boring machine on a rolling base with 680 × 480 × 1160 mm layout.
Precision valve seat boring machine with 1450 mm head capacity and 1500 rpm spindle.
Flywheel grinder for flywheels up to Ø500 mm with 2800 rpm grinding wheel and 3 kW drive.
Vertical honing machine for 45–160 mm bores, 320 mm depth and 125/250 rpm spindle.
150-ton hydraulic bending press with 320 bar system pressure and 30 L/min pump.
100-ton four-post hydraulic press with 320 bar pressure and 15 L/min pump.
1000 kN workshop press with 27 MPa pressure, 600 mm working width and 3 kW motor.
Four-column sliding press series from 1000 to 5000 kN with 31.5 MPa working pressure.
Compact blue HP-50 hydraulic press for everyday workshop pressing and straightening.
Open-side C-type press series from 200 to 1000 kN with three-sided access for large workpieces.
40-ton connecting rod straightener with adjustable mandrels Ø66–110 mm.
Valve grinder for valves up to Ø90 mm with 450 mm grinding wheel and dual motors.
Red cylinder block surface grinder-miller with 350–400 mm grinding width and 600–800 mm height.