PF-MGSD400-45 Profix MGSD400-45 Brake Disc Grinder (Upgraded)
The Profix MGSD400-45 is the upgraded wet brake disc grinder in the MGSD line, with 2200 W + 750 W motors and a 12-minute cycle for heavier-duty vehicles.
Versión en preparación: esta página se muestra en inglés por ahora.
Profix
The Profix MGSD400-40 is a wet-process brake disc grinding machine with a 400 mm capacity, Ra 0.8 µm finish and no airborne grinding dust.
| Input voltage | 380 V / 220 V |
|---|---|
| Motor power | 1500 W + 400 W, dual motors |
| Max grinding diameter | 400 mm |
| Max disc thickness | 40 mm |
| Max disc width | 100 mm |
| Surface finish | Ra 0.8 µm |
| End-face runout | ≤ 0.005 mm |
| Machining time per disc | 15 min |
| Dimensions | 122 × 91 × 115 cm |
| Net weight | 260 kg |
The Profix MGSD400-40 is a brake disc grinding machine that works with a wet grinding process. Water at the cutting point keeps grinding dust out of the workshop air — unlike dry cutting setups that depend on extraction hoods and still leave residue on benches and floor. The same water contact protects surface quality, so finished discs leave the machine with a consistent, clean braking surface: Ra 0.8 µm finish and end-face runout within ≤ 0.005 mm, disc after disc.
Two motors (1500 W + 400 W) drive the machine through a single disc cycle of about 15 minutes, handling discs up to 400 mm in diameter, 40 mm thick and 100 mm wide. Input is 380 V or 220 V, so the machine fits both industrial supplies and standard workshop power. It stands 122 × 91 × 115 cm and weighs 260 kg, a bench-scale machine that anchors a serious brake service corner. As heavy cargo, the MGSD400-40 is shipped by sea in a secured container to Europe, the Middle East and Africa. Contact Profix for pricing and freight options.
The Profix MGSD400-45 is the upgraded wet brake disc grinder in the MGSD line, with 2200 W + 750 W motors and a 12-minute cycle for heavier-duty vehicles.
The Profix MGSD450-45 is the 2025 large-size wet brake disc grinder, taking commercial vehicle discs up to 450 mm in diameter and 45 mm thick.
The Profix MGSD450-45D is a 2026 dual-side wet disc grinder with three spindles that machines both faces at once, cutting a disc in about 8 minutes.