PF-MGSD400-40 Profix MGSD400-40 Brake Disc Grinder (Wet Process)
The Profix MGSD400-40 is a wet-process brake disc grinding machine with a 400 mm capacity, Ra 0.8 µm finish and no airborne grinding dust.
Versión en preparación: esta página se muestra en inglés por ahora.
Profix
The Profix MGSD400-45 is the upgraded wet brake disc grinder in the MGSD line, with 2200 W + 750 W motors and a 12-minute cycle for heavier-duty vehicles.
| Input voltage | 380 V / 220 V |
|---|---|
| Motor power | 2200 W + 750 W, dual motors |
| Max grinding diameter | 400 mm |
| Max disc thickness | 40 mm |
| Max disc width | 100 mm |
| Surface finish | Ra 0.8 µm |
| End-face runout | ≤ 0.005 mm |
| Machining time per disc | 12 min |
| Dimensions | 122 × 91 × 115 cm |
| Net weight | 260 kg |
The Profix MGSD400-45 is the upgraded model of the MGSD brake disc grinding line. Motor power rises to 2200 W + 750 W and the cycle drops to about 12 minutes per disc, which matters when brake work queues up behind an alignment bay on a Monday morning. The wet grinding process is unchanged: water at the cutting point keeps dust out of the air and gives a consistently clean braking surface, an advantage over dry cutting plus extraction in any occupied workshop.
Grinding capacity stays at discs up to 400 mm in diameter, 40 mm thick and 100 mm wide, with the same Ra 0.8 µm surface finish and end-face runout within ≤ 0.005 mm as the rest of the series. The stronger drive makes the 400-45 the better choice for heavier-duty passenger vehicles and repeated commercial use. Input is 380 V or 220 V; the machine measures 122 × 91 × 115 cm and weighs 260 kg. It ships as heavy cargo by sea, container-loaded for Europe, the Middle East and Africa. Ask Profix for a quotation.
The Profix MGSD400-40 is a wet-process brake disc grinding machine with a 400 mm capacity, Ra 0.8 µm finish and no airborne grinding dust.
The Profix MGSD450-45 is the 2025 large-size wet brake disc grinder, taking commercial vehicle discs up to 450 mm in diameter and 45 mm thick.
The Profix MGSD450-45D is a 2026 dual-side wet disc grinder with three spindles that machines both faces at once, cutting a disc in about 8 minutes.