PF-MGSD400-40 Profix MGSD400-40 Brake Disc Grinder (Wet Process)
The Profix MGSD400-40 is a wet-process brake disc grinding machine with a 400 mm capacity, Ra 0.8 µm finish and no airborne grinding dust.
Versión en preparación: esta página se muestra en inglés por ahora.
On-car and bench lathes that cut judder comeback
On-car brake lathes cut disc runout without removing the hub, cutting comeback rates on judder complaints. Bench lathes handle discs off the vehicle. Check minimum and maximum disc thickness range, adapter coverage for your vehicle mix, and whether the machine accepts a truck kit. Compare cutting speed against the time your bays can spare.
The Profix MGSD400-40 is a wet-process brake disc grinding machine with a 400 mm capacity, Ra 0.8 µm finish and no airborne grinding dust.
The Profix MGSD400-45 is the upgraded wet brake disc grinder in the MGSD line, with 2200 W + 750 W motors and a 12-minute cycle for heavier-duty vehicles.
The Profix MGSD450-45 is the 2025 large-size wet brake disc grinder, taking commercial vehicle discs up to 450 mm in diameter and 45 mm thick.
The Profix MGSD450-45D is a 2026 dual-side wet disc grinder with three spindles that machines both faces at once, cutting a disc in about 8 minutes.
Bench brake lathe machining drums to Ø500 mm and discs to Ø385 mm with 245 mm cutting depth.
Stepless 70–320 rpm spindle and heavy 2.0 kW motor handle discs to Ø610 mm and drums to Ø715 mm.
Space-saving brake lathe for drums 180–320 mm and discs up to Ø350 mm with 100 mm tool travel.
Versatile bench lathe for drums Ø180–450 mm and discs Ø102–400 mm with 266 mm cutting travel.
Large-capacity brake lathe with gantry hoist — drums to Ø650 mm and discs to Ø520 mm.
Broad 350–650 mm processing diameter with 1.1 kW drive for demanding brake machining.
Wide 152–700 mm capacity brake lathe with three speeds and 0.75 kW / 380 V motor.