WhatsApp

Versión en preparación: esta página se muestra en inglés por ahora.

BN-XJ001X In-Ground Scissor Lift with Two-Way Stretch Platforms – 4,000 kg, 1,640-2,040 mm

Profix

BN-XJ001X In-Ground Scissor Lift with Two-Way Stretch Platforms – 4,000 kg, 1,640-2,040 mm

Two-way stretch platforms: a 4,000 kg in-ground lift that fits short cars and long vans.

Precio a consultar Pedir presupuesto Preguntar por WhatsApp
  • SKU BN-XJ001X
  • Se envía desde Sea freight, LCL or FCL, SKD packed
  • Preparación 15-25 days
Derechos pagados: Aduanas y derechos: nuestras rutas DDP incluyen el derecho de importación y el despacho, así que el precio de esta página es el precio que pagas. Cuando la activación regional es necesaria, la gestionamos antes del envío.

Para qué sirve

  • Platforms stretch in both directions: 1,640-2,040 mm, from city cars to estates and small vans
  • 4,000 kg capacity with a 2,030 mm lifting height
  • In-ground design keeps the bay floor completely clear when lowered
  • 330 mm lowered height - lowered and sports cars clear it without blocks
  • Two 550 mm platforms on stainless steel slide rails, smooth and low-friction
  • Electric air-lock safety device with patent pneumatic lock and unlock
  • 24 V safety voltage, default-phase and overload protection to international standard
  • CE certified, Pacific Insurance cover, Ministry of Transportation approved

Especificaciones y envío

Lifting capacity4,000 kg
Lifting height2,030 mm
Lowest height330 mm
Platform length1,640-2,040 mm (two-way stretch)
Platform width550 mm per platform
Lifting timeUp 60 s / down 50 s
Power supply380 V three-phase (default) / 220 V
Rated oil pressure20-25 MPa
Air pressure0.5-0.7 MPa
Control voltage24 V safety voltage
Safety systemElectric air-lock safety device, patent pneumatic lock, default-phase and overload protection
InstallationIn-ground, 335 mm recess on reinforced concrete
Trench length1,670 mm
Trench width580 mm
Trench depth335 +/- 5 mm
Trench spacing900 mm
Control cabinet distance1,200-2,600 mm
Cylinder clearanceMin. 2,500-3,000 mm from wall, cylinders facing inwards
Cable routing channelØ100 mm
Required bay footprint7,000 x 4,000 mm
ConcreteMin. 200 mm, flat to +/-5 mm
CertificationCE
Control cabinetIncluded

The BN-XJ001X is an in-ground scissor lift for quick service work with platforms that stretch to suit the vehicle. It lifts 4,000 kg to 2,030 mm, sits inside a 335 mm recess when lowered, and adjusts from 1,640 mm to 2,040 mm in both directions.

For bays that see more than hatchbacks
A short platform forces long cars and small vans into the wrong position: too much overhang at one end, not enough support where the weight is. The XJ001X stretches in both directions to 2,040 mm, so an estate, a crossover or a small panel van sits properly on the platforms. On a bay that services a mixed car park all day, that difference removes a recurring argument with the job.

Still a quick-service lift
The travel is 60 seconds up and 50 seconds down, which is what matters when the lift is used twenty times a day for oil, tyres and brakes rather than parked under one car for an alignment. At 330 mm lowered height, low cars drive on without blocks.

Installation
The recess is 1,670 mm long, 580 mm wide and 335 +/- 5 mm deep, with the trenches 900 mm apart, a Ø100 mm cable channel to the control cabinet and at least 200 mm of concrete levelled to within 5 mm. Cylinders face inwards with 2,500-3,000 mm clearance from the wall. The foundation drawing is supplied before the order.

Safety and build
An electric air-lock safety device with a patented pneumatic lock secures the platforms mechanically during work. The control circuit runs on 24 V safety voltage to international standards, with default-phase and overload protection. Stainless steel slide rails keep travel smooth and resist wear; hydraulics use imported solenoid valves and sealing components.

Certification
CE certified. Insured by Pacific Insurance Company, Ministry of Transportation certified.

Se compra junto con