BN-BDJ001 Super-Thin Wheel Alignment Scissor Lift – 4.5 m, No Trench, 140 mm Drive-Over Height
140 mm high, no trench: a 5,000 kg alignment lift you can drive straight over.
Versión en preparación: esta página se muestra en inglés por ahora.
Profix
5 m deck, 140 mm high, no trench: a van-sized alignment lift with no civil works.
| Lifting capacity | 5,000 kg (main) / 3,000 kg (sub); 4,000 kg on the 220 V version |
|---|---|
| Lifting Height | 2,000 mm (main) / 430 mm (sub) |
| Lowest Height | 140 mm |
| Platform Length | 5,000 mm (main) / 1,500-1,800 mm flexible sub-platform |
| Platform Width | 620 mm (main) / 600 mm (sub) |
| Lifting Time | Up 60 s / down 50 s (main); up 25 s / down 20 s (sub) |
| Power Supply | 380 V three-phase (default) / 220 V (4,000 kg version) |
| Overall length | 5,800 mm including bridge boards |
| Platform arm thickness | 30 mm |
| Rated oil pressure | 20-25 MPa |
| Air pressure | 0.5-0.7 MPa |
| Safety system | Patent pneumatic safety lock, phase-failure and overload protection |
| Installation | Surface-mounted, no trench; concrete slab min. 200 mm thick |
| Floor flatness | +/-5 mm installation tolerance |
| Required bay footprint | 7,500 x 4,000 mm |
| Distance to control cabinet | 1,200-2,600 mm |
| Cylinder clearance | Min. 2,000 mm from wall, cylinders facing inwards |
| Control cabinet | Included |
The BN-BDJ001 (5 m) is a super-thin alignment scissor lift with a full van-length deck. It stands 140 mm off the floor when lowered, so vehicles drive straight over it on the supplied bridge boards, and it bolts to an existing slab instead of into a pit.
Most 5 m alignment decks are in-ground: excavation, foundation drawing, civil works — usually a non-starter in a rented unit or a floor you cannot cut. This one, needs none of that. The 5,000 x 620 mm deck carries 5,000 kg and positions a Sprinter, Transit or Crafter properly instead of hanging over the end.
Less than a kerb, so low-slung cars clear it without ramps. Lifts to 2,000 mm for standing room, sub-platform to 430 mm for level axle work.
30 mm platform arm for rigidity under a loaded van, stainless steel slide rails, imported hydraulic valves and seals, integrated LED work lamps.
Patented pneumatic safety lock, 24 V safety control voltage, phase-failure and overload protection.
Cylinders facing inwards, at least 2,000 mm from the wall; control cabinet 1,200-2,600 mm from the lift. Send your bay drawing for confirmation before dispatch.
CE certified, Pacific Insurance Company cover, Ministry of Transportation certified.
140 mm high, no trench: a 5,000 kg alignment lift you can drive straight over.
One deck, every vehicle: a sliding sub-platform covering 665-1,560 mm, with no trench.
5 m deck, sliding sub-platform, no trench: one bay that covers city cars to panel vans.