Profix

BN-BDJ002 Super-Thin Wheel Alignment Scissor Lift with Sub-Slide – 4.5 m, No Trench, 140 mm

One deck, every vehicle: a sliding sub-platform covering 665-1,560 mm, with no trench.

Price on request Request a quote Ask on WhatsApp

SKU BN-BDJ002-45
Ships from Sea freight, LCL or FCL, SKD
Dispatch 15–25 days

Duty paid: Customs and duty: our DDP lanes include import duty and clearance, so the price on this page is the price you pay. Where the €3-per-item duty applies to low-value consignments, we group items into sets precisely so the cost is spread rather than multiplied.

What it does

Sliding sub-platform: support points adjust across 665-1,560 mm, so city cars and panel vans share one bay
Single or double sub-slides available - specify at order
Only 140 mm high when lowered - no trench, no pit, no civil works
Bolts onto an existing 200 mm concrete slab, flat to +/-5 mm
5,000 kg main platform, 3,000 kg sub-platform, lifts to 2,000 mm (sub 450 mm)
30 mm thick platform arm - high strength, no permanent deformation
Bridge boards both ends, so a wheel rolls straight on and across
Patent pneumatic safety lock, 24 V control voltage, phase-failure and overload protection
CE certified, Pacific Insurance cover, Ministry of Transportation approved

Specifications & shipping

Lifting capacity	5,000 kg (main) / 3,000 kg (sub)
Lifting Height	2,000 mm (main) / 450 mm (sub)
Lowest Height	140 mm
Platform Length	4,500 mm
Platform Width	620 mm (main)
Lifting Time	Up 60 s / down 50 s (main); up 25 s / down 20 s (sub)
Power Supply	380 V three-phase (default) / 220 V (4,000 kg version)
Sub-platform type	Sliding (sub-slide), single or double, optional
Sub-platform support span	665-1,560 mm
Sub-platform slide stroke	+/-450 mm
Platform arm thickness	30 mm
Rated oil pressure	20-25 MPa
Air pressure	0.5-0.7 MPa
Safety system	Patent pneumatic safety lock, phase-failure and overload protection
Installation	Surface-mounted, no trench; concrete slab min. 200 mm thick
Floor flatness	+/-5 mm installation tolerance
Required bay footprint	7,000 x 4,000 mm
Overall length	5,300 mm including bridge boards
Distance to control cabinet	1,200-2,600 mm
Cylinder clearance	Min. 2,000 mm from wall, cylinders facing inwards
Certification	CE
Control cabinet	Included

The BN-BDJ002 (4.5 m) is a super-thin wheel alignment scissor lift with a sliding sub-platform. It stands 140 mm off the floor when lowered, so vehicles drive over it on the bridge boards, and it bolts to an existing concrete slab instead of into a pit.

The sub-slide is the reason to buy this one
A fixed sub-platform forces you to position the vehicle around the lift. The BDJ002 slides its sub-platform supports across a 665-1,560 mm span, so the support points go where the wheels actually are. A city car with a short, narrow track and a panel van with a long, wide one both sit correctly on the same deck, without adding a second lift or turning vehicles away. Single or double sub-slides can be specified, depending on the vehicle mix in your bay.

No trench, so no civil works
The lift installs on a minimum 200 mm concrete slab, flat to +/-5 mm, in a bay of roughly 7,000 x 4,000 mm. There is no excavation, no foundation to pour and no contractor waiting on a permit - which is what makes it viable in a rented unit, on an upper floor, or in a bay whose layout may change. Nothing is buried, so it can be unbolted and moved with you.

Low enough to drive over, high enough to work under
At 140 mm the deck clears the floor by less than a kerb. It lifts to 2,000 mm for standing room underneath, and the sub-platform reaches 450 mm to bring the second axle to a level working height.

Built for daily use
The platform arm is 30 mm thick, so the deck stays rigid under a loaded vehicle instead of flexing. Stainless steel slide rails with a smooth, low-friction surface keep the travel steady and resist wear, and the hydraulic system uses imported solenoid valves and sealing components. LED work lamps built into the platform light the underside of the vehicle.

Safety
A patented safety lock with pneumatic locking and unlocking holds the platform mechanically during work. The control circuit runs on 24 V safety voltage to international standards, with phase-failure and overload protection.

Positioning
Oil cylinders face inwards, at least 2,000 mm from the wall, and the control cabinet sits 1,200-2,600 mm from the lift. Send us your bay drawing and your vehicle mix - that is what determines whether you want a single or a double sub-slide.

Certification
CE certified. Insured by Pacific Insurance Company, Ministry of Transportation certified.