Profix

BN-XJ002 Movable Small Scissor Lift – 4,000 kg, 115 mm Profile, No Trench Needed

115 mm high, 4,000 kg, and it rolls to whichever car needs it.

Price on request Request a quote Ask on WhatsApp

SKU BN-XJ002
Ships from Sea freight, LCL or FCL, SKD packed
Dispatch 15–25 days

Duty paid: Customs and duty: our DDP lanes include import duty and clearance, so the price on this page is the price you pay. Where the €3-per-item duty applies to low-value consignments, we group items into sets precisely so the cost is spread rather than multiplied.

What it does

No trench, no foundation, no installation - wheel it into place and work
4,000 kg capacity on a compact 1,460-2,010 mm stretchable platform
Movable rollers and associated base, so one lift covers a whole row of cars
Two-way approach bridge with flexible driving direction
20 mm thick platform arm - high strength, no permanent deformation
Patent safety lock design, pneumatic lock and unlock
24 V safety voltage, default-phase and overload protection to international standard
CE certified, Pacific Insurance cover, Ministry of Transportation approved

Specifications & shipping

Lifting Capacity	4,000 kg
Lifting Height	1,000 mm
Lowest Height	115 mm
Platform Length	1,460–2,010 mm (stretchable)
Platform Width	490 mm
Lifting Time	up 40 s / down 35 s
Power Supply	380 V / 220 V
Platform arm thickness	20 mm
Rated oil pressure	20-25 MPa
Air pressure	0.5-0.7 MPa
Control voltage	24 V safety voltage
Safety system	Patent safety lock, pneumatic lock and unlock, default-phase and overload protection
Installation	None - movable, surface use, no trench and no foundation
Mobility	Movable rollers with associated base
Approach	Two-way approach bridge, flexible driving direction
Certification	CE
Control cabinet	Included

The BN-XJ002 is a movable mid-rise scissor lift. It stands 115 mm off the floor, carries 4,000 kg to a 1,000 mm working height, and moves on its own rollers - no trench, no foundation, no installation.

One lift, every bay
Because nothing is fixed, the XJ002 goes to the car instead of the car coming to the lift. In a tyre shop that means the same unit works its way along a row of vehicles; in a body shop it frees the spray booth, the prep area and the wheel bay from needing their own lift. On a site where the floor cannot be cut - rented units, upper floors, temporary premises - it is often the only option that works at all.

Working height, honestly stated
1,000 mm is wheel, brake, suspension and body-panel height. It is not standing room underneath; if you need to walk under the car, this is the wrong product and the XJ001 or a BDJ lift is the right one. Being clear about that on the page saves a return.

Platforms and approach
The platforms stretch from 1,460 mm to 2,010 mm to suit the vehicle, at 490 mm wide with a 20 mm thick arm that stays rigid under load. A two-way approach bridge lets the car drive on from either end, which matters when the lift is parked between two rows of vehicles rather than in a dedicated bay.

Moving and locking
The unit rolls on castors with an associated base. Move it only when it is unloaded: raise the lift to its high position, remove the rollers after installing it in place, lower it to the lowest position, then connect the hook under the control cabinet to the lift base and lock it before use. The sequence is on the sheet and belongs in the manual - do not skip it.

Safety
A patented safety lock with pneumatic locking and unlocking secures the platforms during work. The control circuit runs on 24 V safety voltage to international standards, with default-phase and overload protection. Stainless steel slide rails keep the travel smooth; hydraulics use imported solenoid valves and sealing components.

Certification
CE certified. Insured by Pacific Insurance Company, Ministry of Transportation certified.