Profix

BN-XJ001 In-Ground Small Scissor Lift – 4,000 kg, 2,030 mm Lift, Stretchable Platforms

An in-ground lift that leaves the bay floor clear and raises 4,000 kg in 60 seconds.

Price on request Request a quote Ask on WhatsApp

SKU BN-XJ001
Ships from Sea freight, LCL or FCL, SKD
Dispatch 15–25 days

Duty paid: Customs and duty: our DDP lanes include import duty and clearance, so the price on this page is the price you pay. Where the €3-per-item duty applies to low-value consignments, we group items into sets precisely so the cost is spread rather than multiplied.

What it does

4,000 kg capacity, 2,030 mm lifting height - enough for vans and light commercial vehicles
In-ground installation leaves the bay floor completely clear when lowered
Stretchable platforms: 1,540-1,740 mm, adjusted to the vehicle instead of the reverse
Only 330 mm high when down - low enough for lowered and sports cars
Two 550 mm platforms with stainless steel slide rails, smooth and low-friction
Electric air-lock safety device, patent pneumatic lock and unlock
24 V safety voltage, default-phase and overload protection to international standard
CE certified, Pacific Insurance cover, Ministry of Transportation approved

Specifications & shipping

Lifting Capacity	4,000 kg
Lifting Height	2,030 mm
Lowest Height	330 mm
Platform Length	Platform length 1,540-1,740 mm (stretchable)
Platform Width	550 mm per platform
Lifting Time	up 60 s / down 50 s
Power Supply	380 V / 220 V
Rated oil pressure	20-25 MPa
Air pressure	0.5-0.7 MPa
Control voltage	24 V safety voltage
Safety system	Electric air-lock safety device, patent pneumatic lock, default-phase and overload protection
Installation	In-ground, 335 mm recess on reinforced concrete
Trench length	1,580 mm
Trench width	600 mm
Trench depth	335 +/- 5 mm
Trench spacing	900 mm
Control cabinet distance	1,200-2,600 mm
Cylinder clearance	Min. 2,500-3,000 mm from wall, cylinders facing inwards
Cable routing channel	Ø100 mm
Required bay footprint	7,000 x 4,000 mm
Concrete	Min. 200 mm, flat to +/-5 mm
Certification	CE
Control cabinet	Included

The BN-XJ001 is a compact in-ground scissor lift for quick service work - oil changes, tyres, brakes, inspection and pre-delivery checks. Two 550 mm platforms lift 4,000 kg to 2,030 mm, and when lowered they sit inside a 335 mm recess so the bay floor stays clear.

Built for the work that pays the rent
Most of a workshop's lift time is not alignment. It is a car up for twenty minutes to drain oil, swap wheels or check a brake line. The XJ001 is shaped around that job: quick to raise (60 seconds), narrow enough to leave room to work around, and flush with the floor so the bay can be used for anything else the moment it is down.

Stretchable platforms
The platform length adjusts between 1,540 mm and 1,740 mm, so the lift can be set for the vehicles you actually see instead of forcing a compromise position. At 330 mm lowered height, lowered and sports cars clear it without wooden blocks - a small thing that matters more than it sounds, because a car you cannot get onto the lift is a job you turn away.

Installed once, out of the way
The lift needs a 1,580 mm long, 600 mm wide recess at 335 +/- 5 mm depth, with the two trenches 900 mm apart and a Ø100 mm cable channel to the control cabinet. Concrete must be at least 200 mm and level to within 5 mm. We supply the foundation drawing before the order so your contractor can price the work, and the cylinders face inwards with 2,500-3,000 mm clearance from the wall.

Safety and build
An electric air-lock safety device with a patented pneumatic lock holds the platforms mechanically while work is carried out. The control circuit runs on 24 V safety voltage to international standards, with default-phase and overload protection. Stainless steel slide rails keep the travel smooth and resist wear, and the hydraulic system uses imported solenoid valves and sealing components.

Certification
CE certified. Insured by Pacific Insurance Company, Ministry of Transportation certified.