WhatsApp

Versión en preparación: esta página se muestra en inglés por ahora.

QL-R70/40A Traffic-Certified Spray Booth — Fuel / Gas Heating

Profix

QL-R70/40A Traffic-Certified Spray Booth — Fuel / Gas Heating

Ministry-of-Transport certified spray booth with RIELLO burner and double-layer stainless heat exchanger.

Precio a consultar Pedir presupuesto Preguntar por WhatsApp
  • SKU QL-R70-40A
  • Se envía desde Sea freight, LCL or FCL, SKD packed
  • Preparación 25–40 days
Derechos pagados: Aduanas y derechos: nuestras rutas DDP incluyen el derecho de importación y el despacho, así que el precio de esta página es el precio que pagas. Cuando la activación regional es necesaria, la gestionamos antes del envío.

Para qué sirve

  • Working chamber 6900×3900×2650 mm — fits cars, SUVs and light vans
  • Italian RIELLO-FS20 burner with double-layer stainless-steel heat exchanger (diesel or gas)
  • Traffic-certified (China Ministry of Transport spray-booth standard)
  • Four-leaf hand-built main doors 3000×2600 mm with tempered-glass windows and aluminium emergency exit
  • 50 mm rock-wool sandwich panels, galvanized raised floor with steel gratings
  • Delixi electrical control with independent breakers, temperature/time setting and emergency stop
  • Intake + ceiling filtration, TSP ≤ 1.4 mg/m³
  • Activated-carbon or photocatalytic exhaust-gas treatment available as option

Especificaciones y envío

Heating methodfuel oil heating or gas heating
Outer dimensions (L×W×H)7000×4000×3400 mm
Inner dimensions (L×W×H)6900×3900×2650 mm
Plenum chamber450 mm
Floor base height380 mm
Voltage / frequency380 V / 50 Hz (customizable: 200 V/60 Hz, 440 V/60 Hz, 380 V/60 Hz)
Platformmm Galvanized enclosure structure, 1.2 mm thick galvanized steel sheets. Three rows of hot‑dip galvanized 30×5 mm steel gratings are installed in the middle of the booth, and two rows of 3 mm anti‑slip plates on both sides. Surfaces are electrostatic powder‑coated. Load‑bearing brackets adopt 40×80×2.0 mm galvanized square tubes.
Main door3000×2600 — Four‑leaf Hand‑built Sheet‑metal Main Doors Each door adopts 0.8 mm powder‑coated galvanized steel sheets for inner & outer panels, covered with protective films on both sides to avoid scratches. Door inner frame is welded with 1.2 mm galvanized keels. 6 mm cold‑rolled steel embedded plates are welded to keels at hinge locations to avoid door sagging. 180×120×15 mm aluminum‑alloy hinges provide high strength and nice appearance. Observation window: high‑temperature resistant rubber seal strips + 5 mm rounded tempered glass for safety.18 kg fire‑retardant filler is bonded inside the door to ensure panel flatness.
Emergency exit door680*2000 — mm thick aluminum alloy edge wrapping ensures good sealing and anti‑deformation performance.
Wall materialmm rock wool sandwich panel with 0.426 mm double‑sided steel sheets and 100 kg/m³ rock‑wool density.Side reinforcing keels avoid tearing during loading & unloading and enhance wind‑pressure resistance.Inner‑outer protective films reduce surface scratches.
Roof panelmm rock wool panel, double‑sided 0.426 mm steel sheet, rock wool density: 100 kg/m³.
Floor slopethree options available: inner‑side 1m slope, outer‑side 1m slope, full outer‑side slope.
Supply fanh Equipped with one Yancheng Hengkang DDF series single‑inlet centrifugal fan, Model 630B, 7.5 kW variable‑frequency motor. Air volume: 28000‑30000 m³/h, total pressure: 600 Pa. Side‑top air intake, loaded wind speed: 0.38‑0.45 m/s; air change rate: 330 times/h.
Exhaust fanOptional configuration
Heating systemdouble‑layer stainless steel heat exchanger, pneumatic damper actuator for spray‑to‑bake cycle. Max thermal efficiency: 260000 kcal/h, maximum set temperature: 80℃, 4 chimneys and 1 elbow.
Control systemMechanical‑type control cabinet with Delixi (China well‑known brand) electrical components. Independent circuit breakers for main control, fans and lighting. Fitted with lighting switch, spray switch and working indicators. Supports heating‑up spray mode, baking temperature adjustment, time setting and emergency stop. Each two groups of heating lamps have separate control. Fans are equipped with thermal overload protection.
Air filtrationbag filter cotton, effectively filters dust particles larger than 10 μm. Top filter: CC‑600G sub‑high‑efficiency filter cotton, effectively filters dust particles larger than 5 μm. TSP value: ≤1.4 mg/m³.
Exhaust treatmentOptional configuration
Exhaust duct700*700*910 — three straight sections plus one elbow, dimension 700×700×910 mm, machine‑formed from 0.8 mm galvanized steel sheet.

QL-R70/40A — The QL-R70/40A is the traffic-certified (Ministry of Transport) model of the fuel-heated series with Italian RIELLO burner and double-layer stainless-steel heat exchanger. Inner dimensions 6900×3900×2650 mm, outer 7000×4000×3400 mm.

Heating: double‑layer stainless steel heat exchanger, pneumatic damper actuator for spray‑to‑bake cycle. Max thermal efficiency: 260000 kcal/h, maximum set temperature: 80℃, 4 chimneys and…. Air side: Equipped with one Yancheng Hengkang DDF series single‑inlet centrifugal fan, Model 630B, 7.5 kW variable‑frequency motor. Air volume: 28000‑30000 m³/h, total pressure: 600 Pa.….

Structure: 50 mm rock-wool sandwich panels (100 kg/m³), four hand-built sheet-metal main doors 3000×2600 mm with tempered-glass observation windows, one aluminium-edged emergency exit door, galvanized raised floor with steel gratings (slope options available). Control: Delixi mechanical control cabinet with independent breakers, temperature/time setting and emergency stop. Intake filtration: Intake filter cotton + CC-600G ceiling filters. TSP value ≤ 1.4 mg/m³. Exhaust-gas treatment (activated-carbon cabinet or photocatalytic unit) is available as an option.

Voltage 380 V/50 Hz as standard; 200 V/60 Hz, 440 V/60 Hz and 380 V/60 Hz available on request. Sea freight, SKD packed; contact us for a quotation.

Se compra junto con