WhatsApp
QL-R70/40C Spray Paint & Baking Booth — Fuel / Gas Heating (Economy)

Profix

QL-R70/40C Spray Paint & Baking Booth — Fuel / Gas Heating (Economy)

Economy 7 × 4 m spray booth with Italian RIELLO-FS20 burner, fuel oil or gas heating optional.

Price on request Request a quote Ask on WhatsApp
  • SKU QL-R70-40C
  • Ships from Sea freight, LCL or FCL, SKD packed
  • Dispatch 25–40 days
Duty paid: Customs and duty: our DDP lanes include import duty and clearance, so the price on this page is the price you pay. Where the €3-per-item duty applies to low-value consignments, we group items into sets precisely so the cost is spread rather than multiplied.

What it does

  • Working chamber 6900×3900×2650 mm — fits cars, SUVs and light vans
  • Italian RIELLO-FS20 burner with double-layer stainless-steel heat exchanger (diesel or gas)
  • Four-leaf hand-built main doors 3000×2600 mm with tempered-glass windows and aluminium emergency exit
  • 50 mm rock-wool sandwich panels, galvanized raised floor with steel gratings
  • Delixi electrical control with independent breakers, temperature/time setting and emergency stop
  • Intake + ceiling filtration, TSP ≤ 1.4 mg/m³
  • Activated-carbon or photocatalytic exhaust-gas treatment available as option

Specifications & shipping

Heating methodfuel oil heating or gas heating
Outer dimensions (L×W×H)7000×4000×3300 mm
Inner dimensions (L×W×H)6900×3900×2650 mm
Plenum chamber380 mm
Floor base height270 mm
Voltage / frequency380 V / 50 Hz (customizable: 200 V/60 Hz, 440 V/60 Hz, 380 V/60 Hz)
Platformmm Galvanized steel enclosure structure, 12 pieces of two‑course hot‑dip galvanized 30×5 mm steel gratings, three courses of 3 mm anti‑slip plates, electrostatic powder‑coated surface. The load‑bearing bracket adopts reinforced bent sheet‑metal frame structure.
Main door3000×2600 — Four‑leaf Hand‑built Sheet‑metal Main Doors Each door adopts 0.8 mm powder‑coated galvanized steel sheets for inner & outer panels, covered with protective films on both sides to avoid scratches. Door inner frame is welded with 1.2 mm galvanized keels. 6 mm cold‑rolled steel embedded plates are welded to keels at hinge locations to avoid door sagging. 180×120×15 mm aluminum‑alloy hinges provide high strength and nice appearance. Observation window: high‑temperature resistant rubber seal strips + 5 mm rounded tempered glass for safety.18 kg fire‑retardant filler is bonded inside the door to ensure panel flatness.
Emergency exit door680*2000 — mm thick aluminum alloy edge wrapping ensures good sealing and anti‑deformation performance.
Wall materialmm rock wool sandwich panel with 0.426 mm double‑sided steel sheets and 100 kg/m³ rock‑wool density.Side reinforcing keels avoid tearing during loading & unloading and enhance wind‑pressure resistance.Inner‑outer protective films reduce surface scratches.
Roof panelmm Galvanized bent top panel, steel sheet thickness: 0.8 mm
Floor slopethree options available: inner‑side 1m slope, outer‑side 1m slope, full outer‑side slope.
Supply fanh Equipped with 2 sets of YDW‑series centrifugal fans from Yancheng Hengkang, each rated at 4 kW. Total air volume: 24000 m³/h, total pressure: 800 Pa. Side upper air intake. Average loaded air velocity: 0.3‑0.35 m/s; Air‑change rate: 238 times/h.
Exhaust fanOptional
Heating systemdouble‑layer stainless steel heat exchanger, pneumatic damper actuator for spray‑to‑bake cycle. Max thermal efficiency: 260000 kcal/h, maximum set temperature: 80℃, 4 chimneys and 1 elbow.
Control systemAssembled with high‑quality electronic components. Multiple protections are equipped in the main circuit. It is provided with lighting switch, spray mode, constant‑temperature spray mode, baking temperature & time setting, emergency‑stop indicator light, fault alarm and other functions.
Air filtrationOne layer of high‑quality intake filter cotton, effectively filters dust particles larger than 10 μm. Top filter adopts CC‑600G sub‑high‑efficiency filter cotton, effectively filters dust particles larger than 5 μm. TSP value: ≤1.4 mg/m³.
Exhaust treatmentOptional
Exhaust duct700*700*910 — three straight sections plus one elbow, dimension 700×700×910 mm, machine‑formed from 0.8 mm galvanized steel sheet.

QL-R70/40C — The QL-R70/40C is the economy model of the fuel-heated series: an Italian RIELLO burner with double-layer stainless-steel heat exchanger heats the circulating air, suitable for workshops with diesel or gas supply. Inner dimensions 6900×3900×2650 mm, outer 7000×4000×3300 mm.

Heating: double‑layer stainless steel heat exchanger, pneumatic damper actuator for spray‑to‑bake cycle. Max thermal efficiency: 260000 kcal/h, maximum set temperature: 80℃, 4 chimneys and…. Air side: Equipped with 2 sets of YDW‑series centrifugal fans from Yancheng Hengkang, each rated at 4 kW. Total air volume: 24000 m³/h, total pressure: 800 Pa. Side upper air intake.….

Structure: 50 mm rock-wool sandwich panels (100 kg/m³), four hand-built sheet-metal main doors 3000×2600 mm with tempered-glass observation windows, one aluminium-edged emergency exit door, galvanized raised floor with steel gratings (slope options available). Control: Delixi mechanical control cabinet with independent breakers, temperature/time setting and emergency stop. Intake filtration: Intake filter cotton + CC-600G ceiling filters. TSP value ≤ 1.4 mg/m³. Exhaust-gas treatment (activated-carbon cabinet or photocatalytic unit) is available as an option.

Voltage 380 V/50 Hz as standard; 200 V/60 Hz, 440 V/60 Hz and 380 V/60 Hz available on request. Sea freight, SKD packed; contact us for a quotation.

Often bought together