QL-DM70/40C Single-Station Sanding & Prep Booth (7 × 4 m)
Single-station sanding / prep booth, 7 × 4 m, rear-wall extraction with activated-carbon VOC filtration.
Profix
Two-station sanding / prep booth sharing one 5.5 kW exhaust system — saves floor space and equipment cost.
| Outer dimensions (L×W×H) | 7000×7950×3030 mm |
|---|---|
| Inner dimensions (L×W×H) | 6900×3900×2650 mm |
| Voltage / frequency | 380 V / 50 Hz (customizable: 200 V/60 Hz, 440 V/60 Hz, 380 V/60 Hz) |
| Platform | No platform available, optional |
| Main door | 3200×2600 — W Set up 2 sets of electric roller shutter doors, each with a door opening size of 3200 × 2600 (W * H) adopts a low noise electric soft curtain made of high-strength polyester brazing material, and the transparent part in the middle is made of PVC material. The world 's top brand Douya Motor, with a power of 330W, is manually controlled. |
| Emergency exit door | 680 *1800 — mm thick aluminum alloy edge, ensuring both sealing and non deformation. |
| Wall material | 50 mm rock wool board, with iron sheet thickness of 0.426mm on both sides, rock wool density of 80KG, and keel added on both sides, can avoid tearing during loading and unloading, and improve wind pressure resistance strength. |
| Roof panel | The front end is set as an air inlet, equipped with coarse filter cotton, and the rear end is treated with galvanized bending powder spraying; |
| Upper carriage board | No platform available, optional |
| Supply fan | No air supply, relying on the gravitational force of the exhaust fan, the top natural air intake method achieves the purpose of indoor ventilation |
| Exhaust fan | Two workstations share one exhaust system,One Yancheng Hengkang YDW series centrifugal fan is adopted, with a power of 5.5KW and an air volume of 15000m³/h; Ventilation rate: 110 times/h. |
| Control system | Optional electrical tool cabinet: made of galvanized sheet, surface electrostatic spraying, using well-known domestic brand Delixi Electric. Equipped with a main control, fan, and lighting controlled by independent circuit breakers, and equipped with lighting switches, spray paint switches, and work indicator lights. The fan is equipped with a thermal overload protection device. Equipped with a tool storage cabinet with double opening doors. Set up one 380V and one 220V European explosion-proof socket each, equipped with two air source quick plugs. |
| Air filtration | Set 8 pieces of CC-450G medium efficiency filter cotton at the top to effectively filter dust larger than 20 microns. |
| Exhaust treatment | The rear wall is equipped with an exhaust port, which is equipped with one layer of primary efficiency cotton and medium efficiency cloth bag filter cotton to filter dust, and one layer of honeycomb activated carbon to adsorb VOCs in the putty. |
QL-DM70/80C is a double-station sanding / prep booth Inner dimensions 6900×3900×2650 mm, outer 7000×7950×3030 mm for dust extraction during sanding, polishing and prep work before painting.
Structure: 50 mm rock-wool sandwich panels, two electric soft-curtain roller shutter doors (Dooya motor, 330 W, remote control), rear-wall exhaust port with primary + bag filtration and a honeycomb activated-carbon layer that adsorbs VOCs from putty sanding.
Air side: Two workstations share one exhaust system,One Yancheng Hengkang YDW series centrifugal fan is adopted, with a power of 5.5KW and an air volume of 15000m³/h; Ventilation rate: 110… Intake: CC-450G medium-efficiency filter cotton. Control cabinet: Delixi components with independent breakers for fan and lighting, thermal overload protection, 380 V and 220 V explosion-proof sockets and two air quick connectors. Sea freight, SKD packed; contact us for a quotation.
Single-station sanding / prep booth, 7 × 4 m, rear-wall extraction with activated-carbon VOC filtration.
Three-station sanding / prep booth, 7 × 12 m, shared extraction with activated-carbon VOC filtration.
Economy 7 × 4 m spray booth with 30 kW short-wave halogen infrared heating mounted beside double doors.