ProFix Wheel Brush, Stiff-Bristle, 30 cm

What it is for

Brake dust is ferrous, abrasive and bonded to the wheel by heat — the reason a wheel comes clean with a brush and stays grey with a sponge. Both the bristle and the reach matter: a long handle gets to the back of the rim without your knuckles going in first, and a filament stiff enough to lift the dust will not mark a lacquered face if it is worked wet, with the cleaner already on the surface.

This variant is the Stiff-Bristle, 30 cm. Bristles are nylon, set into a body of polypropylene with a crimped ferrule; overall length 30 cm. Soft and stiff are sold as separate brushes on purpose — one brush doing both jobs either scratches a diamond-cut face or leaves the inner barrel dirty.

Specification detail

Stiff-Bristle, 30 cm. nylon filaments 0.6 mm thick in a body of polypropylene, crimped ferrule; overall length 30 cm.

• Long reach for the inner barrel — your knuckles stay out of the rim
• Soft and stiff filaments sold separately: one brush cannot do both jobs
• Crimped ferrule and polypropylene body — survives repeated soaking in wheel cleaner
• Work it wet with the cleaner already on the surface — dry brushing only moves the dust around

Before you order

Check the size and quantity against your own job first: most returns in this category come from ordering the wrong diameter, finish or pack size rather than from a fault. If you are unsure, send us a photo or a measurement and we will confirm which variant you need.