ProFix Cabinet Handle Screw and Spacer Kit, 40 Pieces

What it is for

Fitting handles is the job where a millimetre matters and a second attempt leaves two extra holes in a finished door. A drilling jig sets both hole centres at once and keeps the bit square to the face, which is the difference between a row of handles that lines up and one that nearly lines up.

The screw kit exists for the other half of the problem: fronts of different thickness, and handles whose own screws are too long, too short or the wrong thread. Both items are small, cheap and travel for almost nothing alongside a larger order.

Specification detail

Drilling jig: hardened bushes at 96 mm and 128 mm centres, with a depth stop and a reversible body for left and right doors. Screw kit: M4 screws in 25, 30, 35 and 40 mm lengths with spacers, in a compartmented box.

• Sets both hole centres at once, so the handle cannot end up skewed
• Hardened bushes keep the drill square to the door face
• Reversible body for left- and right-hand doors
• Screw lengths for 16 to 22 mm fronts, with spacers for the rest

Buying more than one

Orders are consolidated and re-weighed at intake, and freight is re-calculated on the actual chargeable weight. If you are ordering several items for one address, ask us for a combined quote before paying — mixing light and bulky items usually brings the freight share down.