ProFix 20-Piece Bar Cabinet Handle Set, 128 mm Hole Centres

What it is for

A cabinet handle is bought on hole centres, not on how it looks. If the holes already drilled in the door are 96 mm apart, a 128 mm handle will not fit and no amount of adjustment fixes it — which is why every variant here leads with its hole centres and only then says what shape it is.

The screw length matters too: door fronts run from 16 mm to 22 mm thick, so handles are supplied with a screw that can be shortened rather than one that bottoms out inside the door. Sets are sized for a kitchen or a run of workshop units, not for a single drawer.

Specification detail

20 handles, 128 mm Hole Centres, in stainless steel with a brushed nickel finish. Supplied with M4 screws long enough for a 22 mm front and cuttable for a 16 mm one, plus the correct bore for the handle foot. Hollow or solid construction is stated per shape.

• Hole centres stated first — the dimension that decides whether it fits your door
• M4 screws long enough for a 22 mm front, and cuttable for a 16 mm one
• stainless steel with a brushed nickel finish, which does not show every fingerprint
• Sold by the set in the quantity a real kitchen needs, not one at a time

Buying more than one

Orders are consolidated and re-weighed at intake, and freight is re-calculated on the actual chargeable weight. If you are ordering several items for one address, ask us for a combined quote before paying — mixing light and bulky items usually brings the freight share down.