ProFix 10-Piece T-Bar Cabinet Handle Set, 128 mm Hole Centres

What it is for

A cabinet handle is bought on hole centres, not on how it looks. If the holes already drilled in the door are 96 mm apart, a 128 mm handle will not fit and no amount of adjustment fixes it — which is why every variant here leads with its hole centres and only then says what shape it is.

The screw length matters too: door fronts run from 16 mm to 22 mm thick, so handles are supplied with a screw that can be shortened rather than one that bottoms out inside the door. Sets are sized for a kitchen or a run of workshop units, not for a single drawer.

Specification detail

10 handles, 128 mm Hole Centres, in stainless steel with a matte black finish. Supplied with M4 screws long enough for a 22 mm front and cuttable for a 16 mm one, plus the correct bore for the handle foot. Hollow or solid construction is stated per shape.

• Hole centres stated first — the dimension that decides whether it fits your door
• M4 screws long enough for a 22 mm front, and cuttable for a 16 mm one
• stainless steel with a matte black finish, which does not show every fingerprint
• Sold by the set in the quantity a real kitchen needs, not one at a time

Before you order

Check the size and quantity against your own job first: most returns in this category come from ordering the wrong diameter, finish or pack size rather than from a fault. If you are unsure, send us a photo or a measurement and we will confirm which variant you need.