GB66 Dry Ice Blasting Carbon Cleaning Machine
Dry ice blasting unit that strips intake carbon with no water, no chemicals and no dismantling.
Profix
No-cut thermal regeneration for DPF, DOC and SCR — a diesel burner delivers 600–1000 °C process heat from a 220 V, 1 kW supply.
| Model | DPF-RY1000 |
|---|---|
| Equipment power | 1.0 kW |
| Rated voltage | 220 V, 50 Hz |
| Operating temperature | 600–1000 °C |
| Fuel consumption | 1–3 L/h |
| Fuel tank | 12 L, diesel |
| Air supply | ≤1.0 MPa |
| Regeneration | No-cut, clamp fixtures for DPF / DOC / SCR |
| Dimensions | 880 × 880 × 1320 mm |
| Standard accessories | DPF clamp set, conversion elbow, thermometer gun, gloves |
A soot-packed DPF resists pneumatic and wet cleaning: once the soot has hardened into the cell walls, the only reliable recovery is to oxidise it where it sits. The RY1000 connects to the filter through clamp fixtures, heats the core to 600–1000 °C so the trapped soot burns off, then runs a blow cycle that clears the remaining ash — the filter comes back to full flow without cutting, welding or sending the canister away.
The process heat comes from an oil burner, not from resistance heaters, so the machine draws only 1 kW from an ordinary 220 V socket while delivering 600–1000 °C at 1–3 L of diesel per hour. A workshop without a three-phase supply can run a full regeneration program, and running cost per filter is a litre or two of diesel. The cabinet rolls on casters, so the unit moves between bays or out to the yard instead of the filter moving to the machine.
Four-zone temperature control runs from the touch panel, with intake air filtration for clean combustion. Pressure is detected automatically and the process is cut off on abnormal pressure; high-temperature and wind-pressure alarms protect both the machine and the operator. Heating to working temperature takes minutes, not the half hour an electric oven needs, which keeps total regeneration time per filter short.
Built for truck, bus and construction-equipment after-treatment service: DPF, DOC and SCR cans on light, medium and heavy duty vehicles, including urea-crystallised SCR converters. The standard kit includes the DPF special clamp and clamp assembly, conversion elbow, thermometer gun and gloves, so a bench, an air line and a diesel can are enough to start taking regeneration work in-house.
Shipped by sea freight with the rest of a workshop order; standard lead time 15–25 days. Price on request — tell us the vehicle mix you service and we will quote the machine with the right clamp set.
Dry ice blasting unit that strips intake carbon with no water, no chemicals and no dismantling.
Walnut shell blaster for intake valve carbon, with drawer hopper and built-in filtration.