CL665 EVAP Smoke Leak Detector with Electric Oil Fill
Smoke generator with one-key electric oil fill, adjustable flow and pressure hold testing.
Profix
Simple smoke generator with one-key smoke output and overload protection on the heater.
| Power | DC 12 V |
|---|---|
| Oil filling | manual, top port |
| Protection | overload protection on heater |
| Flow | adjustable |
The CL600 is the simpler smoke generator in the range: oil goes in through a top port by hand, and the smoke is produced at the press of one key. That suits workshops running a leak test occasionally rather than daily, where a fixed reservoir would sit holding stale fluid between jobs. Flow is adjustable at the unit so the smoke volume can be matched to the system being tested.
The heater carries overload protection, which cuts the circuit before the element is damaged by a dry run or an over-long cycle. That is the failure that takes most smoke machines out of service, and the heater is also the one component that cannot be repaired at the bay. The unit runs from a 12 V supply.
For shops testing evaporators and intake ducts several times a week, the electric-fill model with pressure hold is the better fit; the CL600 is the entry point. Both travel by sea freight in a single cartoon.
Smoke generator with one-key electric oil fill, adjustable flow and pressure hold testing.