EF500 45-Degree Angle Asymmetric Gantry Two Post Lift – 5000 kg
5000 kg capacity asymmetric two-post lift with 45° gantry design for fast, safe tire, brake and body-repair work
Zwei-, Scheren- und Viersäulenbühnen plus Spindelhubhöhen
Unser Hebesortiment umfasst Zweisäulen-, Scheren-, Viersäulen- und Spindelhubhöhen für Pkw, Transporter und leichte Nutzfahrzeuge. Jedes Modell ist mit Tragfähigkeit, Hubhöhe und Grundfläche ausgewiesen, damit Sie die Bühne bereits vor der Anfrage auf Ihre Hallenplanung abstimmen können – egal ob Einplatzwerkstatt oder große Servicestätte.
Entscheidend sind drei Punkte: die Tragfähigkeit (üblich sind 3,5–4,5 t für Pkw-Arbeiten – prüfen Sie die Hebel- bzw. Plattformlast gegen Ihr schwerstes Fahrzeug), der Antrieb (elektrohydraulisch oder elektromechanische Spindel) und die Montageart: Bodenplatte oder Portalführung, Aufbau auf dem Boden oder Schere im Laufgraben. Der Versand erfolgt standardmäßig als Seefracht in einem Kistensatz; für dringende Bestellungen bieten wir Luftfracht an. Fordern Sie ein Angebot an, dann bestätigen wir Lieferzeit und Versandbedingungen.
5000 kg capacity asymmetric two-post lift with 45° gantry design for fast, safe tire, brake and body-repair work
140 mm high, no trench: a 5,000 kg alignment lift you can drive straight over.
5 m deck, 140 mm high, no trench: a van-sized alignment lift with no civil works.
One deck, every vehicle: a sliding sub-platform covering 665-1,560 mm, with no trench.
5 m deck, sliding sub-platform, no trench: one bay that covers city cars to panel vans.
An in-ground lift that leaves the bay floor clear and raises 4,000 kg in 60 seconds.
115 mm high, 4,000 kg, and it rolls to whichever car needs it.
3,500 kg, 115 mm high, and it rolls to whichever car needs it.
110 mm high, one-touch levelling: 4,000 kg with no trench and no ramps.
A 2,700 kg mobile lift you can push into the paint booth.
The alignment bay that disappears into your floor — 5,000 kg capacity, flush at 330 mm, and 2,080 mm of clear working height the moment it rises.
Flush-to-floor alignment lift: 5,000 kg main platform, 430 mm sub-platform, 60-second rise.
4500 kg capacity ultra-thin asymmetric two-post lift with 45° gantry design — 90 mm minimum clearance for low-slung sports cars.
5 m deck, 5,000 kg, flush with the floor: the alignment lift for long-wheelbase vans.
A drive-on deck that turns any flat bay into an alignment bay - 5,000 kg, 1,800 mm of lift, and no pit to dig.
4500 kg floor-plate two-post lift with 45° asymmetric columns and no overhead beam — only 3100 mm total height, so it fits low-ceiling bays where a gantry lift cannot go.
A 5,300 mm deck that fits the bay a longer lift would block - 4,000 kg, 1,800 mm of lift, and no pit to dig.
A 6,500 mm deck for the long and the heavy - 5,500 kg on 650 mm runways, 3,050 mm between columns, and no pit to dig.
Two-way stretch platforms: a 4,000 kg in-ground lift that fits short cars and long vans.
4000 kg clear-floor two-post lift with overhead gantry — no base plate, free drive-through access and full underfloor space for trolleys and extraction arms.
4,000 kg and 2,580 mm drive-through: clears wide cars and vans.