WhatsApp

Deutsche Fassung in Vorbereitung — diese Seite wird vorerst auf Englisch angezeigt.

BN-XJ001 In-Ground Small Scissor Lift – 4,000 kg, 2,030 mm Lift, Stretchable Platforms

Profix

BN-XJ001 In-Ground Small Scissor Lift – 4,000 kg, 2,030 mm Lift, Stretchable Platforms

An in-ground lift that leaves the bay floor clear and raises 4,000 kg in 60 seconds.

Preis auf Anfrage Angebot anfordern Per WhatsApp fragen
  • SKU BN-XJ001
  • Versand aus Sea freight, LCL or FCL, SKD packed
  • Bearbeitung 15–25 days
Verzollt: Zoll und Abgaben: Unsere DDP-Routen enthalten Einfuhrzoll und Abfertigung — der Preis auf dieser Seite ist der Endpreis. Wo der Zoll von 3 € pro Stück für geringwertige Sendungen greift, bündeln wir Artikel zu Sets, damit sich der Betrag verteilt statt zu multiplizieren.

Was das Produkt leistet

  • 4,000 kg capacity, 2,030 mm lifting height - enough for vans and light commercial vehicles
  • In-ground installation leaves the bay floor completely clear when lowered
  • Stretchable platforms: 1,540-1,740 mm, adjusted to the vehicle instead of the reverse
  • Only 330 mm high when down - low enough for lowered and sports cars
  • Two 550 mm platforms with stainless steel slide rails, smooth and low-friction
  • Electric air-lock safety device, patent pneumatic lock and unlock
  • 24 V safety voltage, default-phase and overload protection to international standard
  • CE certified, Pacific Insurance cover, Ministry of Transportation approved

Technische Daten & Versand

Lifting Capacity4,000 kg
Lifting Height2,030 mm
Lowest Height330 mm
Platform LengthPlatform length 1,540-1,740 mm (stretchable)
Platform Width550 mm per platform
Lifting Timeup 60 s / down 50 s
Power Supply380 V / 220 V
Rated oil pressure20-25 MPa
Air pressure0.5-0.7 MPa
Control voltage24 V safety voltage
Safety systemElectric air-lock safety device, patent pneumatic lock, default-phase and overload protection
InstallationIn-ground, 335 mm recess on reinforced concrete
Trench length1,580 mm
Trench width600 mm
Trench depth335 +/- 5 mm
Trench spacing900 mm
Control cabinet distance1,200-2,600 mm
Cylinder clearanceMin. 2,500-3,000 mm from wall, cylinders facing inwards
Cable routing channelØ100 mm
Required bay footprint7,000 x 4,000 mm
ConcreteMin. 200 mm, flat to +/-5 mm
CertificationCE
Control cabinetIncluded

The BN-XJ001 is a compact in-ground scissor lift for quick service work - oil changes, tyres, brakes, inspection and pre-delivery checks. Two 550 mm platforms lift 4,000 kg to 2,030 mm, and when lowered they sit inside a 335 mm recess so the bay floor stays clear.

Built for the work that pays the rent
Most of a workshop's lift time is not alignment. It is a car up for twenty minutes to drain oil, swap wheels or check a brake line. The XJ001 is shaped around that job: quick to raise (60 seconds), narrow enough to leave room to work around, and flush with the floor so the bay can be used for anything else the moment it is down.

Stretchable platforms
The platform length adjusts between 1,540 mm and 1,740 mm, so the lift can be set for the vehicles you actually see instead of forcing a compromise position. At 330 mm lowered height, lowered and sports cars clear it without wooden blocks - a small thing that matters more than it sounds, because a car you cannot get onto the lift is a job you turn away.

Installed once, out of the way
The lift needs a 1,580 mm long, 600 mm wide recess at 335 +/- 5 mm depth, with the two trenches 900 mm apart and a Ø100 mm cable channel to the control cabinet. Concrete must be at least 200 mm and level to within 5 mm. We supply the foundation drawing before the order so your contractor can price the work, and the cylinders face inwards with 2,500-3,000 mm clearance from the wall.

Safety and build
An electric air-lock safety device with a patented pneumatic lock holds the platforms mechanically while work is carried out. The control circuit runs on 24 V safety voltage to international standards, with default-phase and overload protection. Stainless steel slide rails keep the travel smooth and resist wear, and the hydraulic system uses imported solenoid valves and sealing components.

Certification
CE certified. Insured by Pacific Insurance Company, Ministry of Transportation certified.

Passt oft dazu