Cric rouleur profil bas, 2 t, levée 95–510 mm
Se glisse sous les voitures abaissées dès 95 mm et lève à 510 mm — transport maritime uniquement.
Crics, presses, grues, compresseurs, rangement, outillage
L'équipement d'atelier, c'est la longue liste qu'on commande une fois et qu'on garde dix ans : crics et chandelles, presses hydrauliques, grues moteur, compresseurs, rangements d'outils, tours à disques de frein et outillage à couple contrôlé. Les fiches produits portent les chiffres qui comptent — charges admissibles, pressions de service, dimensions des plans de travail — pour comparer les achats sur la même base.
Achetez sur l'usage réel, pas sur les maxima de catalogue : tonnage de presse pour les travaux réellement exécutés, débit du compresseur (air libre à la pression de service, pas le volume balayé) face aux outils fonctionnant simultanément, et des rangements dimensionnés pour le poids de votre outillage. La plupart des articles partent palettisés en fret maritime ; le petit outillage peut voyager en aérien. Une seule demande de devis pour tout l'atelier : nous chiffrons un envoi groupé.
Se glisse sous les voitures abaissées dès 95 mm et lève à 510 mm — transport maritime uniquement.
38 € d'économie
Six rails de 45 cm pour libérer l'établi : 12 kg de force par rail.
Le premier jeu de douilles : deux carrés, métrique et impérial, en coffret résistant.
Boulons de roue, suspension, culasse — certificat de calibrage, précision ±3 %.
Kit complet avec supports et visserie — escaliers de cave, combles et marches d'atelier.
The Profix MGSD400-40 is a wet-process brake disc grinding machine with a 400 mm capacity, Ra 0.8 µm finish and no airborne grinding dust.
The Profix MGSD400-45 is the upgraded wet brake disc grinder in the MGSD line, with 2200 W + 750 W motors and a 12-minute cycle for heavier-duty vehicles.
The Profix MGSD450-45 is the 2025 large-size wet brake disc grinder, taking commercial vehicle discs up to 450 mm in diameter and 45 mm thick.
The Profix MGSD450-45D is a 2026 dual-side wet disc grinder with three spindles that machines both faces at once, cutting a disc in about 8 minutes.
Rigid cast-iron surface mill with variable head speed and ball-screw table feed for precision cylinder head refacing.
360° roll-over cylinder head leak tester with stainless-steel heated water tank for fast, reliable pressure checks.
Bench brake lathe machining drums to Ø500 mm and discs to Ø385 mm with 245 mm cutting depth.
Stepless 70–320 rpm spindle and heavy 2.0 kW motor handle discs to Ø610 mm and drums to Ø715 mm.
Space-saving brake lathe for drums 180–320 mm and discs up to Ø350 mm with 100 mm tool travel.
Versatile bench lathe for drums Ø180–450 mm and discs Ø102–400 mm with 266 mm cutting travel.
Large-capacity brake lathe with gantry hoist — drums to Ø650 mm and discs to Ø520 mm.
Broad 350–650 mm processing diameter with 1.1 kW drive for demanding brake machining.
Wide 152–700 mm capacity brake lathe with three speeds and 0.75 kW / 380 V motor.
35° tilt, 1000 kg capacity dual-axis leveling table for precision cylinder head surface milling.
Cylinder boring machine with 30–180 mm bore range, 450 mm depth and inverter-driven 140–610 rpm spindle.
Cylinder boring machine with six spindle speeds 175–600 rpm and 30–180 mm boring capacity.
Special-order boring machine for middle/large heavy engines — 42–180 mm bore and 650 mm depth.
Compact 39–70 mm cylinder boring machine with 480 rpm spindle and 160 mm boring depth.
Two-model cylinder boring line: Ø65–105 mm and Ø80–165 mm with 300–400 mm boring depth.
Portable 39–70 mm cylinder boring machine on a rolling base with 680 × 480 × 1160 mm layout.
Precision valve seat boring machine with 1450 mm head capacity and 1500 rpm spindle.
Flywheel grinder for flywheels up to Ø500 mm with 2800 rpm grinding wheel and 3 kW drive.
Vertical honing machine for 45–160 mm bores, 320 mm depth and 125/250 rpm spindle.
150-ton hydraulic bending press with 320 bar system pressure and 30 L/min pump.
100-ton four-post hydraulic press with 320 bar pressure and 15 L/min pump.
1000 kN workshop press with 27 MPa pressure, 600 mm working width and 3 kW motor.
Four-column sliding press series from 1000 to 5000 kN with 31.5 MPa working pressure.
Compact blue HP-50 hydraulic press for everyday workshop pressing and straightening.
Open-side C-type press series from 200 to 1000 kN with three-sided access for large workpieces.
40-ton connecting rod straightener with adjustable mandrels Ø66–110 mm.
Valve grinder for valves up to Ø90 mm with 450 mm grinding wheel and dual motors.
Red cylinder block surface grinder-miller with 350–400 mm grinding width and 600–800 mm height.