WhatsApp

Version française en préparation — cette page s'affiche pour l'instant en anglais.

PF-MGSD400-40 Profix MGSD400-40 Brake Disc Grinder (Wet Process)

Profix

PF-MGSD400-40 Profix MGSD400-40 Brake Disc Grinder (Wet Process)

The Profix MGSD400-40 is a wet-process brake disc grinding machine with a 400 mm capacity, Ra 0.8 µm finish and no airborne grinding dust.

Prix sur demande Demander un devis Demander sur WhatsApp
  • SKU PF-MGSD400-40
  • Expédié depuis Sea freight, LCL or FCL
  • Préparation 15–25 days
Droits acquittés : Douane et droits : nos routes DDP incluent les droits et le dédouanement — le prix affiché est le prix payé. Lorsque le droit de 3 € par article s'applique, nous regroupons les articles en lots pour en répartir le coût.

Ce que fait le produit

  • Input voltage: 380 V / 220 V
  • Motor power: 1500 W + 400 W, dual motors
  • Max grinding diameter: 400 mm
  • Max disc thickness: 40 mm
  • Max disc width: 100 mm
  • Surface finish: Ra 0.8 µm

Caractéristiques & expédition

Input voltage380 V / 220 V
Motor power1500 W + 400 W, dual motors
Max grinding diameter400 mm
Max disc thickness40 mm
Max disc width100 mm
Surface finishRa 0.8 µm
End-face runout≤ 0.005 mm
Machining time per disc15 min
Dimensions122 × 91 × 115 cm
Net weight260 kg

Wet Brake Disc Grinding Without Airborne Dust

The Profix MGSD400-40 is a brake disc grinding machine that works with a wet grinding process. Water at the cutting point keeps grinding dust out of the workshop air — unlike dry cutting setups that depend on extraction hoods and still leave residue on benches and floor. The same water contact protects surface quality, so finished discs leave the machine with a consistent, clean braking surface: Ra 0.8 µm finish and end-face runout within ≤ 0.005 mm, disc after disc.

Two motors (1500 W + 400 W) drive the machine through a single disc cycle of about 15 minutes, handling discs up to 400 mm in diameter, 40 mm thick and 100 mm wide. Input is 380 V or 220 V, so the machine fits both industrial supplies and standard workshop power. It stands 122 × 91 × 115 cm and weighs 260 kg, a bench-scale machine that anchors a serious brake service corner. As heavy cargo, the MGSD400-40 is shipped by sea in a secured container to Europe, the Middle East and Africa. Contact Profix for pricing and freight options.

Souvent achetés ensemble