WhatsApp

Version française en préparation — cette page s'affiche pour l'instant en anglais.

PF-MGSD450-45D Profix MGSD450-45D Dual-Side Brake Disc Grinder (2026 Model)

Profix

PF-MGSD450-45D Profix MGSD450-45D Dual-Side Brake Disc Grinder (2026 Model)

The Profix MGSD450-45D is a 2026 dual-side wet disc grinder with three spindles that machines both faces at once, cutting a disc in about 8 minutes.

Prix sur demande Demander un devis Demander sur WhatsApp
  • SKU PF-MGSD450-45D
  • Expédié depuis Sea freight, LCL or FCL
  • Préparation 15–25 days
Droits acquittés : Douane et droits : nos routes DDP incluent les droits et le dédouanement — le prix affiché est le prix payé. Lorsque le droit de 3 € par article s'applique, nous regroupons les articles en lots pour en répartir le coût.

Ce que fait le produit

  • Input voltage: 380 V / 220 V
  • Spindle motors: 2200 W + 1800 W + 750 W, three spindles
  • Grinding mode: both disc faces machined simultaneously
  • Max grinding diameter: 450 mm
  • Max disc thickness: 45 mm
  • Surface finish: Ra 0.8 µm

Caractéristiques & expédition

Input voltage380 V / 220 V
Spindle motors2200 W + 1800 W + 750 W, three spindles
Grinding modeboth disc faces machined simultaneously
Max grinding diameter450 mm
Max disc thickness45 mm
Surface finishRa 0.8 µm
End-face runout≤ 0.005 mm
Machining time per disc8 min
Dimensions125 × 95 × 128 cm
Net weight236 kg

Double-Side Grinding for High-Volume Brake Shops

The Profix MGSD450-45D is the 2026 flagship of the MGSD wet grinding line, built for repair centres where brake discs never stop arriving. Three spindles (2200 W + 1800 W + 750 W) machine both faces of the disc at the same time, cutting cycle time to about 8 minutes per disc — roughly a third less than the single-side models in the series. Both faces finish in one setup, which also removes re-clamping from the quality equation.

Grinding capacity reaches 450 mm diameter and 45 mm disc thickness, covering the large discs of commercial vehicles as well as passenger work. Surface finish and geometry stay within series tolerance: Ra 0.8 µm and end-face runout within ≤ 0.005 mm, with the wet process keeping dust out of the workshop air. The machine measures 125 × 95 × 128 cm, weighs 236 kg and runs on 380 V or 220 V. For high-flow service centres, the 45D is the throughput choice in this line. It ships by sea as heavy cargo, container-packed. Request a quotation from Profix.

Souvent achetés ensemble