PF-KDX3 Profix KDX3 Mobile Infrared Curing Lamp
The Profix KDX3 mobile infrared curing lamp runs three 1000 W tubes with two curing areas of 800 × 800 mm² and 800 × 500 mm² for panel-by-panel drying.
Deutsche Fassung in Vorbereitung — diese Seite wird vorerst auf Englisch angezeigt.
Profix
The Profix KDX2 is a mobile short-wave infrared curing lamp with two 1000 W tubes, an 800 × 800 mm curing area and a 9.5 kg body you can move panel to panel.
| Heating tubes | 2 × 1000 W halogen short-wave infrared, double-layer explosion-proof |
|---|---|
| Housing | aluminium alloy lamp panel |
| Curing area | 800 × 800 mm² |
| Net weight | 9.5 kg |
| Power | AC 200–240 V, 50 Hz |
The Profix KDX2 is a mobile paint curing lamp built around two 1000 W halogen short-wave infrared tubes with a double-layer explosion-proof design, housed in an aluminium alloy lamp panel. Short-wave infrared does what hot air cannot: it penetrates the coating and cures it from the inside out, rather than baking the surface first and trapping solvent underneath. Because there is no air stream, it does not blow dust onto fresh paint — a real advantage in a working booth or prep area.
The curing area is 800 × 800 mm², which suits bumpers, bonnets and single panels. At 9.5 kg the lamp is genuinely portable: roll it to the job, plug it into AC 200–240 V, 50 Hz and start curing — no installation, no ducting, no warm-up infrastructure. It is the entry model for workshops adding infrared drying to prep-and-drying work. As light-freight equipment it can ship by sea alongside larger Profix orders, saving space in the same container. Request a quotation from Profix.
The Profix KDX3 mobile infrared curing lamp runs three 1000 W tubes with two curing areas of 800 × 800 mm² and 800 × 500 mm² for panel-by-panel drying.
The Profix KDT3 ultra-low base curing lamp runs three 1000 W tubes over a 1200 × 1000 mm area, sized for fender and door zones on complete vehicles.