QL-DM70/40C Single-Station Sanding & Prep Booth (7 × 4 m)
Single-station sanding / prep booth, 7 × 4 m, rear-wall extraction with activated-carbon VOC filtration.
Version française en préparation — cette page s'affiche pour l'instant en anglais.
Profix
Stainless-steel parent-child spray booth with laminated glass walls, robot-ready, for high-end body shops.
| Outer dimensions (L×W×H) | 7000×4000×3300 mm |
|---|---|
| Inner dimensions (L×W×H) | 6900×3900×2650 mm |
| Plenum chamber | 380 mm |
| Floor base height | 270 mm |
| Voltage / frequency | 380 V / 50 Hz (customizable: 200 V/60 Hz, 440 V/60 Hz, 380 V/60 Hz) |
| Main door | 3000×2600 — Four‑leaf Manual Stainless Steel Main Gate. The door frame of each leaf is fabricated from 1.2 mm black‑titanium stainless steel material. The inner perimeter of the door frame is welded with 2 mm square tube keel framework. 6 mm cold‑rolled steel plates are embedded and welded onto the keels at hinge mounting positions to prevent gate sagging. 180*120, 15 mm thick aluminum‑alloy mould hinges are adopted for both high strength and elegant appearance. The viewing window uses double‑layer hollow interlayer 8 mm tempered glass for safety against personal injury. |
| Emergency exit door | 680*2000 — mm Stainless steel frame, 1‑leaf, 680*2000 (W*H). Specially‑made 2 mm thick aluminum alloy edging ensures good sealing and anti‑deformation performance. |
| Wall material | kw Rear Wall: 50mm rock wool panel with double-sided 0.426mm thick steel sheets and a rock wool density of 100KG. Reinforced keels are installed on both sides to prevent panel tearing during loading and unloading, while greatly improving wind pressure resistance. Protective films are covered on both inner and outer surfaces of the panel to avoid scratches. Left Wall: The left wall adopts a stainless steel frame fitted with double-layer (5+16+5) laminated tempered glass. It features excellent sound insulation and heat insulation performance with an elegant, high-grade appearance and superior viewing effect. Right Wall: Equipped with an electric rolling shutter door with an opening size of L6000mm * H2550mm. The door curtain is pressed with double-layer color steel plates with a total thickness of 20mm. It is fitted with an imported DOYA motor with a power of 1.1kw, featuring low noise and durable operation. Heavy-duty column framework is configured for enhanced structural stability. |
| Roof panel | mm Galvanized bent top panel, steel sheet thickness: 0.8 mm |
| Floor slope | Galvanized steel enclosure panel structure. The interior is fully paved with hot‑dip galvanized 30*5 mm steel grating. Load‑bearing brackets adopt thickened sheet‑metal bent frame structure. Four car‑moving slide rails are equipped. |
| Supply fan | h Equipped with 2 sets of YDW‑series centrifugal fans from Yancheng Hengkang, each rated at 4 kW. Total air volume: 24000 m³/h, total pressure: 800 Pa. Side upper air intake. Average loaded air velocity: 0.3‑0.35 m/s; Air‑change rate: 238 times/h. |
| Exhaust fan | Optional |
| Heating system | None |
| Control system | Mechanical‑control electrical cabinet with touch‑screen operation. Equipped with well‑known domestic brand Delixi electrical components. Main control, fan and lighting are respectively controlled by independent circuit breakers. It is also provided with lighting switch, painting switch, working indicator lights and emergency stop control. The fan is fitted with thermal overload protection device. |
| Air filtration | One layer of high‑quality intake filter cotton, effectively filters dust particles larger than 10 μm. Top filter adopts CC‑600G sub‑high‑efficiency filter cotton, effectively filters dust particles larger than 5 μm. TSP value: ≤1.4 mg/m³. |
| Exhaust treatment | Optional |
| Exhaust duct | 700*700*910 — three straight sections plus one elbow, dimension 700×700×910 mm, machine‑formed from 0.8 mm galvanized steel sheet. |
QL-SP400 Spray — The QL-SP400 "parent-child" booth is a stainless-steel and tempered-glass showroom-style spray booth: a large main chamber plus connected sub-chambers let one operator spray while another booth bakes or preps, saving floor space in high-end body shops. Inner dimensions 6900×3900×2650 mm, outer 7000×4000×3300 mm.
Heating: None. Air side: Equipped with 2 sets of YDW‑series centrifugal fans from Yancheng Hengkang, each rated at 4 kW. Total air volume: 24000 m³/h, total pressure: 800 Pa. Side upper air intake.….
Structure: 50 mm rock-wool sandwich panels (100 kg/m³), four hand-built sheet-metal main doors 3000×2600 mm with tempered-glass observation windows, one aluminium-edged emergency exit door, galvanized raised floor with steel gratings (slope options available). Control: Touch-screen control cabinet (Delixi components) with independent breakers and emergency stop. Intake filtration: Intake filter cotton + CC-600G ceiling filters. TSP value ≤ 1.4 mg/m³. Exhaust-gas treatment (activated-carbon cabinet or photocatalytic unit) is available as an option.
Voltage 380 V/50 Hz as standard; 200 V/60 Hz, 440 V/60 Hz and 380 V/60 Hz available on request. Sea freight, SKD packed; contact us for a quotation.
Single-station sanding / prep booth, 7 × 4 m, rear-wall extraction with activated-carbon VOC filtration.
Two-station sanding / prep booth sharing one 5.5 kW exhaust system — saves floor space and equipment cost.
Three-station sanding / prep booth, 7 × 12 m, shared extraction with activated-carbon VOC filtration.