QL-DM70/40C Single-Station Sanding & Prep Booth (7 × 4 m)
Single-station sanding / prep booth, 7 × 4 m, rear-wall extraction with activated-carbon VOC filtration.
Version française en préparation — cette page s'affiche pour l'instant en anglais.
Profix
Premium enlarged 7.5 × 4.5 m spray booth (2.8 m inner height) with PLC, inverter fan and QL-XF10K carbon cabinet.
| Heating method | Mica crystal heating plate electric heater + internal circulation (external‑mounted type) |
|---|---|
| Outer dimensions (L×W×H) | 7600×4600×3500 mm |
| Inner dimensions (L×W×H) | 7500×4500×2800 mm |
| Plenum chamber | 400 mm |
| Floor base height | 300 mm |
| Voltage / frequency | 380 V / 50 Hz (customizable: 200 V/60 Hz, 440 V/60 Hz, 380 V/60 Hz) |
| Platform | Stainless steel enclosure structure, 12 pieces of two‑row hot‑dip galvanized 30×5 mm steel gratings, three rows of 3 mm anti‑slip plates, electrostatic powder‑coated surface, load‑bearing support legs made of stainless steel square tubes with 6 longitudinal pieces arranged. |
| Main door | 3000×2600 — four‑leaf hand‑fabricated sheet‑metal main doors. Each door’s inner and outer panels are hand‑made of 0.8 mm powder‑coated galvanized steel sheets with protective films on both sides to reduce surface scratches. 1.2 mm galvanized keels are spliced‑welded around inside the door, and 6 mm cold‑rolled steel plates are pre‑embedded and welded to keels at hinge mounting positions to prevent door sagging. 180×120, 15 mm thick aluminum‑alloy hinges are used for high strength and nice appearance. The observation window adopts high‑temperature rubber inner sealing strips and 5 mm tempered round glass for safety. 18 kg flame‑retardant filler is bonded inside doors with panels to guarantee overall flatness. |
| Emergency exit door | 680*2000 — mm thick aluminum alloy edge wrapping ensures good sealing and anti‑deformation performance. |
| Wall material | mm rock wool sandwich panel with 0.426 mm double‑sided steel sheets and 100 kg/m³ rock‑wool density.Side reinforcing keels avoid tearing during loading & unloading and enhance wind‑pressure resistance.Inner‑outer protective films reduce surface scratches. |
| Roof panel | mm machine‑made color steel composite panel, filled with fire‑proof rock wool of 120 kg/m³, double‑side steel sheet thickness 0.5 mm, with keels on both sides. |
| Floor slope | three options available: inner‑side 1m slope, outer‑side 1m slope, full outer‑side slope. |
| Supply fan | h Adopt one Yancheng Hengkang DDF series single‑inlet centrifugal fan, model 630B, power 7.5 kW, variable‑frequency motor. Air volume: 28000‑30000 m³/h, total pressure: 600 Pa. Side top air intake, loaded wind speed: 0.38‑0.45 m/s; air change rate: 330 times/h. |
| Exhaust fan | pa Equipped with 1 set of 4‑82‑6.3E 15 kW turbo exhaust fan, air volume: 38525 m³/h, total pressure: 1465‑986 Pa. |
| Heating system | Heated by mica crystal heating plates, 10 sets equipped, 3.0 kW power per set; total power 30 kW, external‑mounted installation. The operating surface temperature of heaters shall not exceed 150℃, lower than the ignition temperature of applied solvents. All power cables are 2.5‑mm² 500‑℃ high‑temperature wires, and all power supply cables are connected via flame‑proof devices. Pneumatic damper switches during painting‑baking operation, variable‑frequency fan runs at 80% internal circulation to achieve even chamber temperature and prevent dust floating upward during baking. |
| Control system | min PLC‑based control with touch‑screen HMI. Domestic well‑known Delixi electric components; main control, fan and lighting with separate circuit breakers, including lighting/spray switches, working indicators, heat‑up spray, baking temperature & time setting, emergency stop and over‑temperature alarm. Every two heater groups are independently controlled. Fan with thermal overload protection. For baking, supply fan auto‑adjusts frequency and opens pneumatic reversing damper for internal circulation. After baking, supply & exhaust fans auto‑start and shut down after 3‑minute runtime. System fitted with internal‑external differential pressure monitoring for auto‑alarm when pressure difference exceeds set value. |
| Air filtration | Air intake adopts G4 bag filter cotton, effectively filtering dust particles larger than 10 μm; top filter is CC‑600G sub‑high‑efficiency filter cotton, effectively filtering dust particles larger than 5 μm. TSP value: ≤1.4 mg/m³. |
| Exhaust treatment | pa Activated Carbon Adsorption Method, Cabinet dimension: L1600×W1250×H2500 mm (motor excluded), Pre‑treatment with two‑stage primary plate filter cotton, 6‑layer honeycomb activated carbon (iodine value ≥600), filling volume approx. 1 m³, Equipped with 1 set of 4‑82‑6.3E 15 kW turbo exhaust fan, air volume: 38525 m³/h, total pressure: 1465‑986 Pa. |
| Exhaust duct | 700*700*910 — three straight sections plus one elbow, dimension 700×700×910 mm, machine‑formed from 0.8 mm galvanized steel sheet. |
| Negative-pressure safety device | To prevent excessive indoor negative pressure under special conditions, the air suction panel opens automatically to reduce indoor negative pressure and ensure chamber safety. |
QL-S75/45/28 + QL-XF10K — The QL-S350 is the premium model of the distributed electric heating series: mica-crystal heating plates with inverter-controlled fan and 80% internal circulation during baking, PLC + touchscreen control, and a stainless steel platform for long service life. Inner dimensions 7500×4500×2800 mm, outer 7600×4600×3500 mm.
Heating: Heated by mica crystal heating plates, 10 sets equipped, 3.0 kW power per set; total power 30 kW, external‑mounted installation. The operating surface temperature of heaters shall…. Air side: Adopt one Yancheng Hengkang DDF series single‑inlet centrifugal fan, model 630B, power 7.5 kW, variable‑frequency motor. Air volume: 28000‑30000 m³/h, total pressure: 600 Pa. Side… Exhaust: Equipped with 1 set of 4‑82‑6.3E 15 kW turbo exhaust fan, air volume: 38525 m³/h, total pressure: 1465‑986 Pa..
Structure: 50 mm rock-wool sandwich panels (100 kg/m³), four hand-built sheet-metal main doors 3000×2600 mm with tempered-glass observation windows, one aluminium-edged emergency exit door, galvanized raised floor with steel gratings (slope options available). Control: PLC + touchscreen control (Delixi components), over-temperature alarm, inverter fan. Intake filtration: G4 bag intake filtration + CC-600G ceiling filters. TSP value ≤ 1.4 mg/m³. Exhaust-gas treatment (activated-carbon cabinet or photocatalytic unit) is available as an option.
Voltage 380 V/50 Hz as standard; 200 V/60 Hz, 440 V/60 Hz and 380 V/60 Hz available on request. Sea freight, SKD packed; contact us for a quotation.
Single-station sanding / prep booth, 7 × 4 m, rear-wall extraction with activated-carbon VOC filtration.
Two-station sanding / prep booth sharing one 5.5 kW exhaust system — saves floor space and equipment cost.
Three-station sanding / prep booth, 7 × 12 m, shared extraction with activated-carbon VOC filtration.