WhatsApp

Version française en préparation — cette page s'affiche pour l'instant en anglais.

QL-S350 Premium Spray Booth — Mica-Crystal Heating, PLC & Inverter

Profix

QL-S350 Premium Spray Booth — Mica-Crystal Heating, PLC & Inverter

Premium 7 × 4 m spray booth: 30 kW mica-crystal heating, inverter fan with 80% internal circulation, PLC touchscreen.

Prix sur demande Demander un devis Demander sur WhatsApp
  • SKU QL-S350
  • Expédié depuis Sea freight, LCL or FCL, SKD packed
  • Préparation 25–40 days
Droits acquittés : Douane et droits : nos routes DDP incluent les droits et le dédouanement — le prix affiché est le prix payé. Lorsque le droit de 3 € par article s'applique, nous regroupons les articles en lots pour en répartir le coût.

Ce que fait le produit

  • Working chamber 6900×3900×2650 mm — fits cars, SUVs and light vans
  • Mica-crystal heating plates, 30 kW, external-mounted with internal circulation
  • Four-leaf hand-built main doors 3000×2600 mm with tempered-glass windows and aluminium emergency exit
  • 50 mm rock-wool sandwich panels, galvanized raised floor with steel gratings
  • PLC + touchscreen control with inverter fan and internal-circulation baking
  • Intake + ceiling filtration, TSP ≤ 1.4 mg/m³
  • Activated-carbon or photocatalytic exhaust-gas treatment available as option

Caractéristiques & expédition

Heating methodMica crystal heating plate electric heater + internal circulation (external‑mounted type)
Outer dimensions (L×W×H)7000×4000×3300 mm
Inner dimensions (L×W×H)6900×3900×2650 mm
Plenum chamber380 mm
Floor base height270 mm
Voltage / frequency380 V / 50 Hz (customizable: 200 V/60 Hz, 440 V/60 Hz, 380 V/60 Hz)
PlatformStainless steel enclosure structure, 12 pieces of two‑row hot‑dip galvanized 30×5 mm steel gratings, three rows of 3 mm anti‑slip plates, electrostatic powder‑coated surface, load‑bearing support legs made of stainless steel square tubes with 6 longitudinal pieces arranged.
Main door3000×2600 — four‑leaf hand‑fabricated sheet‑metal main doors. Each door’s inner and outer panels are hand‑made of 0.8 mm powder‑coated galvanized steel sheets with protective films on both sides to reduce surface scratches. 1.2 mm galvanized keels are spliced‑welded around inside the door, and 6 mm cold‑rolled steel plates are pre‑embedded and welded to keels at hinge mounting positions to prevent door sagging. 180×120, 15 mm thick aluminum‑alloy hinges are used for high strength and nice appearance. The observation window adopts high‑temperature rubber inner sealing strips and 5 mm tempered round glass for safety. 18 kg flame‑retardant filler is bonded inside doors with panels to guarantee overall flatness.
Emergency exit door680*2000 — mm thick aluminum alloy edge wrapping ensures good sealing and anti‑deformation performance.
Wall materialmm rock wool sandwich panel with 0.426 mm double‑sided steel sheets and 100 kg/m³ rock‑wool density.Side reinforcing keels avoid tearing during loading & unloading and enhance wind‑pressure resistance.Inner‑outer protective films reduce surface scratches.
Roof panelmm machine‑made color steel composite panel, filled with fire‑proof rock wool of 120 kg/m³, double‑side steel sheet thickness 0.5 mm, with keels on both sides.
Floor slopethree options available: inner‑side 1m slope, outer‑side 1m slope, full outer‑side slope.
Supply fanh Adopt one Yancheng Hengkang DDF series single‑inlet centrifugal fan, model 630B, power 7.5 kW, variable‑frequency motor. Air volume: 28000‑30000 m³/h, total pressure: 600 Pa. Side top air intake, loaded wind speed: 0.38‑0.45 m/s; air change rate: 330 times/h.
Exhaust fanh Adopt one Yancheng Hengkang DDF series single‑inlet centrifugal fan, model 630B, power 7.5 kW, variable‑frequency motor. Air volume: 28000‑30000 m³/h, total pressure: 600 Pa. Side top air intake, loaded wind speed: 0.38‑0.45 m/s; air change rate: 330 times/h.
Heating systemHeated by mica crystal heating plates, 10 sets equipped, 3.0 kW power per set; total power 30 kW, external‑mounted installation. The operating surface temperature of heaters shall not exceed 150℃, lower than the ignition temperature of applied solvents. All power cables are 2.5‑mm² 500‑℃ high‑temperature wires, and all power supply cables are connected via flame‑proof devices. Pneumatic damper switches during painting‑baking operation, variable‑frequency fan runs at 80% internal circulation to achieve even chamber temperature and prevent dust floating upward during baking.
Control systemmin PLC‑based control with touch‑screen HMI. Domestic well‑known Delixi electric components; main control, fan and lighting with separate circuit breakers, including lighting/spray switches, working indicators, heat‑up spray, baking temperature & time setting, emergency stop and over‑temperature alarm. Every two heater groups are independently controlled. Fan with thermal overload protection. For baking, supply fan auto‑adjusts frequency and opens pneumatic reversing damper for internal circulation. After baking, supply & exhaust fans auto‑start and shut down after 3‑minute runtime. System fitted with internal‑external differential pressure monitoring for auto‑alarm when pressure difference exceeds set value.
Air filtrationAir intake adopts G4 bag filter cotton, effectively filtering dust particles larger than 10 μm; top filter is CC‑600G sub‑high‑efficiency filter cotton, effectively filtering dust particles larger than 5 μm. TSP value: ≤1.4 mg/m³.
Exhaust treatmentOptional configuration
Exhaust duct700*700*910 — three straight sections plus one elbow, dimension 700×700×910 mm, machine‑formed from 0.8 mm galvanized steel sheet.
Negative-pressure safety deviceTo prevent excessive indoor negative pressure under special conditions, the air suction panel opens automatically to reduce indoor negative pressure and ensure chamber safety.

QL-S350 — The QL-S350 is the premium model of the distributed electric heating series: mica-crystal heating plates with inverter-controlled fan and 80% internal circulation during baking, PLC + touchscreen control, and a stainless steel platform for long service life. Inner dimensions 6900×3900×2650 mm, outer 7000×4000×3300 mm.

Heating: Heated by mica crystal heating plates, 10 sets equipped, 3.0 kW power per set; total power 30 kW, external‑mounted installation. The operating surface temperature of heaters shall…. Air side: Adopt one Yancheng Hengkang DDF series single‑inlet centrifugal fan, model 630B, power 7.5 kW, variable‑frequency motor. Air volume: 28000‑30000 m³/h, total pressure: 600 Pa. Side… Exhaust: Adopt one Yancheng Hengkang DDF series single‑inlet centrifugal fan, model 630B, power 7.5 kW, variable‑frequency motor. Air volume: 28000‑30000 m³/h, total pressure: 600 Pa. Side….

Structure: 50 mm rock-wool sandwich panels (100 kg/m³), four hand-built sheet-metal main doors 3000×2600 mm with tempered-glass observation windows, one aluminium-edged emergency exit door, galvanized raised floor with steel gratings (slope options available). Control: PLC + touchscreen control (Delixi components), over-temperature alarm, inverter fan. Intake filtration: G4 bag intake filtration + CC-600G ceiling filters. TSP value ≤ 1.4 mg/m³. Exhaust-gas treatment (activated-carbon cabinet or photocatalytic unit) is available as an option.

Voltage 380 V/50 Hz as standard; 200 V/60 Hz, 440 V/60 Hz and 380 V/60 Hz available on request. Sea freight, SKD packed; contact us for a quotation.

Souvent achetés ensemble