WhatsApp

Version française en préparation — cette page s'affiche pour l'instant en anglais.

QL-D70/40A + QL-XF10K Traffic-Certified Spray Booth with Carbon Cabinet

Profix

QL-D70/40A + QL-XF10K Traffic-Certified Spray Booth with Carbon Cabinet

Traffic-certified spray booth with mica-crystal heating plus QL-XF10K activated-carbon cabinet.

Prix sur demande Demander un devis Demander sur WhatsApp
  • SKU QL-D70-40A-XF10K
  • Expédié depuis Sea freight, LCL or FCL, SKD packed
  • Préparation 25–40 days
Droits acquittés : Douane et droits : nos routes DDP incluent les droits et le dédouanement — le prix affiché est le prix payé. Lorsque le droit de 3 € par article s'applique, nous regroupons les articles en lots pour en répartir le coût.

Ce que fait le produit

  • Working chamber 6900×3900×2650 mm — fits cars, SUVs and light vans
  • Mica-crystal heating plates, 30 kW, external-mounted with internal circulation
  • Traffic-certified (China Ministry of Transport spray-booth standard)
  • Four-leaf hand-built main doors 3000×2600 mm with tempered-glass windows and aluminium emergency exit
  • 50 mm rock-wool sandwich panels, galvanized raised floor with steel gratings
  • Delixi electrical control with independent breakers, temperature/time setting and emergency stop
  • Intake + ceiling filtration, TSP ≤ 1.4 mg/m³
  • Activated-carbon or photocatalytic exhaust-gas treatment available as option

Caractéristiques & expédition

Heating methodMica crystal heating plate electric heater + internal circulation (external‑mounted type)
Outer dimensions (L×W×H)7000×4000×3400 mm
Inner dimensions (L×W×H)6900×3900×2650 mm
Plenum chamber450 mm
Floor base height300 mm
Voltage / frequency380 V / 50 Hz (customizable: 200 V/60 Hz, 440 V/60 Hz, 380 V/60 Hz)
Platformmm Galvanized enclosure structure, 1.2 mm thick galvanized steel plate, three sets of hot‑dip galvanized 30×5 mm steel gratings fitted in the middle of the chamber, two sets of 3 mm anti‑slip plates on both sides of the chamber, electrostatic powder‑coated surface, load‑bearing brackets adopt 40×80×2.0 mm galvanized square tubes.
Main door3000×2600 — four‑leaf hand‑fabricated sheet‑metal main doors. Each door’s inner and outer panels are hand‑made of 0.8 mm powder‑coated galvanized steel sheets with protective films on both sides to reduce surface scratches. 1.2 mm galvanized keels are spliced‑welded around inside the door, and 6 mm cold‑rolled steel plates are pre‑embedded and welded to keels at hinge mounting positions to prevent door sagging. 180×120, 15 mm thick aluminum‑alloy hinges are used for high strength and nice appearance. The observation window adopts high‑temperature rubber inner sealing strips and 5 mm tempered round glass for safety. 18 kg flame‑retardant filler is bonded inside doors with panels to guarantee overall flatness.
Emergency exit door680*2000 — mm thick aluminum alloy edge wrapping ensures good sealing and anti‑deformation performance.
Wall materialmm rock wool sandwich panel with 0.426 mm double‑sided steel sheets and 100 kg/m³ rock‑wool density.Side reinforcing keels avoid tearing during loading & unloading and enhance wind‑pressure resistance.Inner‑outer protective films reduce surface scratches.
Roof panelmm machine‑made color steel composite panel, filled with fire‑proof rock wool of 120 kg/m³, double‑side steel sheet thickness 0.5 mm, with keels on both sides.
Floor slopethree options available: inner‑side 1m slope, outer‑side 1m slope, full outer‑side slope.
Supply fanh Adopt one Yancheng Hengkang DDF series single‑inlet centrifugal fan, model 630B, power 7.5 kW, variable‑frequency motor. Air volume: 28000‑30000 m³/h, total pressure: 600 Pa. Side top air intake, loaded wind speed: 0.38‑0.45 m/s; air change rate: 330 times/h.
Exhaust fanpa Equipped with one 4‑82‑5.6E 11 kW turbo exhaust fan, air volume: 26386 m³/h, total pressure: 1082‑741 Pa.
Heating systemHeated by mica crystal heating plates, 10 sets equipped, 3.0 kW power per set; total power 30 kW, external‑mounted installation. The operating surface temperature of heaters shall not exceed 150℃, lower than the ignition temperature of applied solvents. All power cables are 2.5‑mm² 500‑℃ high‑temperature wires, and all power supply cables are connected via flame‑proof devices. Pneumatic damper switches during painting‑baking operation, variable‑frequency fan runs at 80% internal circulation to achieve even chamber temperature and prevent dust floating upward during baking.
Control systemmin PLC‑based control with touch‑screen HMI. Domestic well‑known Delixi electric components; main control, fan and lighting with separate circuit breakers, including lighting/spray switches, working indicators, heat‑up spray, baking temperature & time setting, emergency stop and over‑temperature alarm. Every two heater groups are independently controlled. Fan with thermal overload protection. For baking, supply fan auto‑adjusts frequency and opens pneumatic reversing damper for internal circulation. After baking, supply & exhaust fans auto‑start and shut down after 3‑minute runtime. System fitted with internal‑external differential pressure monitoring for auto‑alarm when pressure difference exceeds set value.
Air filtrationAir intake adopts G4 bag filter cotton, effectively filtering dust particles larger than 10 μm; top filter is CC‑600G sub‑high‑efficiency filter cotton, effectively filtering dust particles larger than 5 μm. TSP value: ≤1.4 mg/m³.
Exhaust treatmentpa Activated carbon adsorption method, cabinet dimension: L1600×W1250×H2500 mm (motor excluded), two‑stage primary plate filter cotton for pre‑treatment, 6‑layer honeycomb activated carbon with iodine value ≥600, approx. 1 m³, one 4‑82‑5.6E 11 kW turbo exhaust fan, air volume: 26386 m³/h, total pressure: 1082‑741 Pa.
Exhaust duct700*700*910 — three straight sections plus one elbow, dimension 700×700×910 mm, machine‑formed from 0.8 mm galvanized steel sheet.
Negative-pressure safety deviceTo prevent excessive indoor negative pressure under special conditions, the air suction panel opens automatically to reduce indoor negative pressure and ensure chamber safety.

QL-D70/40A + QL-XF10K — The QL-D70/40A belongs to the traffic-certified product series (Ministry of Transport certified): it heats with mica-crystal heating plates plus internal circulation, giving even temperature distribution and low energy consumption. Inner dimensions 6900×3900×2650 mm, outer 7000×4000×3400 mm.

Heating: Heated by mica crystal heating plates, 10 sets equipped, 3.0 kW power per set; total power 30 kW, external‑mounted installation. The operating surface temperature of heaters shall…. Air side: Adopt one Yancheng Hengkang DDF series single‑inlet centrifugal fan, model 630B, power 7.5 kW, variable‑frequency motor. Air volume: 28000‑30000 m³/h, total pressure: 600 Pa. Side… Exhaust: Equipped with one 4‑82‑5.6E 11 kW turbo exhaust fan, air volume: 26386 m³/h, total pressure: 1082‑741 Pa..

Structure: 50 mm rock-wool sandwich panels (100 kg/m³), four hand-built sheet-metal main doors 3000×2600 mm with tempered-glass observation windows, one aluminium-edged emergency exit door, galvanized raised floor with steel gratings (slope options available). Control: PLC + touchscreen control (Delixi components), over-temperature alarm, inverter fan. Intake filtration: G4 bag intake filtration + CC-600G ceiling filters. TSP value ≤ 1.4 mg/m³. Exhaust-gas treatment (activated-carbon cabinet or photocatalytic unit) is available as an option.

Voltage 380 V/50 Hz as standard; 200 V/60 Hz, 440 V/60 Hz and 380 V/60 Hz available on request. Sea freight, SKD packed; contact us for a quotation.

Souvent achetés ensemble