WhatsApp

Version française en préparation — cette page s'affiche pour l'instant en anglais.

BN-XJ002S Movable Small Scissor Lift – 3,500 kg, 115 mm Profile, No Trench Needed

Profix

BN-XJ002S Movable Small Scissor Lift – 3,500 kg, 115 mm Profile, No Trench Needed

3,500 kg, 115 mm high, and it rolls to whichever car needs it.

Prix sur demande Demander un devis Demander sur WhatsApp
  • SKU BN-XJ002S
  • Expédié depuis Sea freight, LCL or FCL, SKD packed
  • Préparation 15–25 days
Droits acquittés : Douane et droits : nos routes DDP incluent les droits et le dédouanement — le prix affiché est le prix payé. Lorsque le droit de 3 € par article s'applique, nous regroupons les articles en lots pour en répartir le coût.

Ce que fait le produit

  • 3,500 kg capacity at a 1,000 mm working height - wheels, brakes, body panels
  • No trench, no foundation, no installation: wheel it into place and work
  • Only 115 mm high when lowered - drive over it, no ramps
  • Platforms stretch 1,460-2,010 mm to fit different vehicle lengths
  • Two-way approach bridge, so the car drives on from either end
  • Optional electric or pneumatic safety-lock release - specify at order
  • 20 mm platform arm, stainless steel slide rails, powder-coated finish
  • 24 V safety voltage, default-phase and overload protection; CE certified

Caractéristiques & expédition

Lifting Capacity3,500 kg
Lifting Height1,000 mm
Lowest Height115 mm
Platform Length1,460-2,010 mm (stretchable)
Platform Width490 mm
Lifting Timeup 40 s / down 35 s
Power Supply380 V / 220 V
Rated oil pressure20-25 MPa
Platform arm thickness20 mm
Air pressure0.5-0.7 MPa
Control voltage24 V safety voltage
Safety systemPatent safety lock; pneumatic lock and unlock standard, electric unlock optional
InstallationNone - movable, surface use, no trench and no foundation
MobilityMovable rollers with associated base
ApproachTwo-way approach bridge, flexible driving direction
CertificationCE
Control cabinetIncluded

The 3,500 kg movable lift

115 mm off the floor, 1,000 mm lift, on its own rollers. No trench, no foundation, no installation — the same frame as our 4 t model, rated for the work a tyre bay, body shop or detailing operation actually does.

One lift, many positions

Nothing is fixed, so the unit goes to the car: along a row of vehicles, between prep and paint, or into a bay whose floor cannot be cut.

What 1,000 mm gets you

Platforms and approach

Platforms stretch 1,460-2,010 mm, 490 mm wide, 20 mm arm. Two-way approach bridge, so the car drives on from either end.

Moving it safely

Move only when unloaded. Raise to high position, remove the rollers once in place, lower to the lowest position, then hook the control cabinet to the base and lock it before use.

Safety and certification

Patent safety lock with pneumatic lock and unlock (electric release optional), 24 V safety control voltage, default-phase and overload protection. CE certified, Pacific Insurance Company cover, Ministry of Transportation certified.

Souvent achetés ensemble