Droits acquittés : Douane et droits : nos routes DDP incluent les droits et le dédouanement — le prix affiché est le prix payé. Lorsque le droit de 3 € par article s'applique, nous regroupons les articles en lots pour en répartir le coût.
Ce que fait le produit
Automatic inflate, deflate and check - set the target, press the air key, and the machine stops itself at pressure
±0.05 accuracy on an LCD readout, switchable between bar, psi and kPa from the panel — one number, no conversion in your head
1-7 bar / 15-102 psi covers motorcycle, car, van and light commercial tires; heavy truck tires run above this range
10 m of rubber hose reaches the far corner of a long-wheelbase van with the vehicle still on the ramp
430 x 80 x 300 mm on the wall - reclaims the floor space a trolley inflator takes up, and needs only an 8-10 bar air line and AC220V
Caractéristiques & expédition
Model
BN-BGCQ001
Type
Wall-mounted, full-automatic intelligent inflator
Suitable vehicles
Motorcycle, car, small and medium-sized vehicles
Suitable industries
Tire shop, beauty shop, fast repair shop, repair factory
Working pressure
1–7 bar / 15–102 psi
Input air pressure
8–10 kg/cm² (8–10 bar)
Output pressure
7 kg/cm² (7 bar)
Accuracy
±0.05
Display
LCD screen, digital readout
Units
bar / psi / kPa, switchable
Inflation mode
Full-automatic: inflate, deflate, check
Hose
10 m rubber tube
Air quality
Oil content ≤ 0.03%, dew point ≤ 2 °C
Breaking pressure
15 kg/cm² (15 bar)
Power supply
AC 220 V / 50 Hz
Frequency
50 Hz
Overall size
430 × 80 × 300 mm
What "automatic" actually means here There are three jobs in setting a tire — filling, checking and correcting over-pressure — and this machine does all three. You key in the target on the display, press the air key, and the inlet valve opens. When the sensor reads the set point, the valve closes and the buzzer sounds. If the tire came in over-pressure, the machine vents it back down to the set point: no gauge-watching, no thumb on a bleed valve, and the same result whether a technician or an apprentice is holding the hose.
Accuracy is the product A tire that leaves 0.3 bar high comes back as a handling complaint; one that leaves low comes back as a wear claim. The BN-BGCQ001 reads to ±0.05 on a digital display with a 1–7 bar working range, and the panel switches units between bar, psi and kPa with the switchover key — so a customer's psi spec and your technician's bar reading are the same number, not a conversion made in someone's head.
Ten metres of hose changes the workflow 10 m of rubber hose is enough to reach the far corner of a long-wheelbase van with the vehicle still on the ramp, and enough to serve a second bay from the same wall unit. The hose returns to a hook beside the body, so it is off the floor between jobs — which is also the single biggest thing that stops a hose getting driven over.
Wall space instead of floor space At 430 × 80 × 300 mm and mounted at eye level, the unit gives you back the square metre a wheeled inflator occupies and puts the display where a technician actually looks. Nothing to trip over, nothing to roll away, nothing to lose. The body is a sealed wall cabinet with the controls on the front face, so the working parts stay out of the way of the hose and the tools.
What it needs from your workshop This is an inflator, not a compressor — it takes shop air at 8–10 kg/cm² (8–10 bar) and delivers up to 7 kg/cm². Run it off a filtered, dried line: the unit is rated for air with oil content ≤ 0.03% and a dew point ≤ 2 °C, and a cheap coalescing filter upstream is far less expensive than a blocked valve. Electrical supply is AC 220 V / 50 Hz as listed; a 15 kg/cm² breaking pressure protects the body if the inlet regulator fails.
Smart vertical tire inflator that automatically inflates, deflates and checks tire pressure with preset precision - ideal for tire shops, beauty shops and fast repair workshops.
Semi-automatic nitrogen tire inflator with CMS high-purity nitrogen generation (95%–99.5%) , one-touch inflation, digital precision and a compact footprint for any tire shop.